User Guide

26 EN
12 Phone settings
You can customize the settings to make it your
own phone.
Set the date and time
For further information, see chapter 'Get
started', sections 'Set the date and time' and
'Set the date and time format'.
Auto answer
When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press or
to answer the incoming call.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Auto answer], then press [OK] to
conrm.
4 Select [On]/[Off], and press [OK] to
conrm.
» The setting is saved.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station when
you are on a call or when the phone is in
standby mode.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Eco mode], then press [OK] to
conrm.
4 Select [On]/[Off], and press [OK] to
conrm.
» The setting is saved.
» is displayed in standby mode.
Note
• When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the transmission power of the
handset and base station in standby mode.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [ECO+ mode], then press [OK] to
conrm.
4 Select [On]/[Off], and press [OK] to
conrm.
» The setting is saved.
Note
• Make sure that all the handsets registered to the base
station are M888 in order to have the ECO+ feature
functioning properly.
• When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.