DVD Micro Theatre System User manual

22
English
Basic Functions
Plug and Play (for tuner installation)
Plug and play allows you to store all available
radio stations automatically.
If plug and play has not been installed
1 When you turn on the system, “AUTO
INSTALL- PRESS PLAY TO START” will be
displayed.
2 Press 38 to start installation.
➜ "AUTO" is displayed.
➜ PRG will start to flash.
➜ The system will search all radio stations on
the FM band.
➜ All available radio stations with strong signal
strength will be stored automatically.
➜ The system will stop searching when all
available radio stations are stored or when the
memory for 20 preset radio stations is full.
Reinstalling plug and play
1 In Standby, press and hold 38 on the system
until “AUTO INSTALL- PRESS PLAY TO
START” is displayed.
2 Press 2; to start installation.
➜ All previously stored radio stations will be
replaced.
To exit without storing the plug and play
● Press STOP 7 on the system.
Note:
– If Plug and Play installation is not completed and
no station is preset, it will be reinitiated the next
time you power on the system.
pg001-pg038_MCD149-05-Eng 2007.9.13, 17:3222