Orion/2 High Speed Dome Camera Outdoor Dome Installation & User Instructions 3040-00069
Orion/2 Outdoor 1
Orion/2 Outdoor Preface The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice.
Orion/2 Outdoor Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing. • Do not block cooling holes on the bracket This camera has a cooling fan inside.
Orion/2 Outdoor Content 1. Overview .................................................................................................................................... 6 1.1 Product Features............................................................................................................. 7 2. Connecting the High Speed Dome .......................................................................................... 8 2.1 Package Content...........................................................
Orion/2 Outdoor 3.3.11 TITLE SETTING .............................................................................................. 30 3.3.12 ALARM SETTING............................................................................................ 30 3.3.13 HOME SETTING ............................................................................................. 32 3.3.14 SEQUENCE .................................................................................................... 33 3.3.
Orion/2 Outdoor 1. Overview Orion/2 is a new subcompact integrated high speed dome camera designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. Orion/2 series dome cameras support one cabling for easy installation, and can be integrated with CCTV products, such as DVRs, Control Keyboards, and CCTV accessories for a total surveillance solution.
Orion/2 Outdoor Large set of built-in protocols provide connectivity to other surveillance systems. The built-in protocols include Ernitec, Pelco, VCL, Philips, AD-422 (Manchester), etc, which allow the Orion/2 High Speed Dome Camera series to be integrated with a wide range of surveillance systems. 1.1 Product Features Precise and Accurate Tracking • Auto Calibration • Scheduling Functions • Pan driver accuracy of 0.225° • Preset speed up to 400°/sec.
Orion/2 Outdoor 2. Connecting the High Speed Dome Please refer to the following sections to connect, set and operate the dome camera. In order to control the integrated high speed dome, basically a control keyboard or other control device is required. 2.1 Package Content Before proceeding, please check the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer for assistance.
Orion/2 Outdoor 2.2 Switch Definition First of all, configuring the dome ID and communication protocol is required before connecting the dome camera to other devices. The switches used for configuring these settings are located on the bottom of the dome camera. Outdoor Dome 2.
Orion/2 Outdoor RS-485 is the interface that communicates the dome camera and its control device; for this reason, the RS-485 setup of the dome and the control device must be the same. The RS-485 default setting is half-duplex (see the diagram as follows). Please do not change the default setting without qualified specialist or supplier’s notice. As for the Pin 3 and Pin 4, they are used for termination and Line Lock adjustment respectively. The Pin 5 is mainly used after firmware upgrade.
Orion/2 Outdoor Switch No. Protocol Baud Rate 00 VCL 9600 01 Pelco D 2400 02 Pelco P 4800 04 Chiper 9600 05 Philips 9600 06 Ernitec* 2400 07 DSCP 9600 08 AD422 4800 09 DM P 9600 11 Pelco D 4800 12 Pelco D 9600 13 Pelco P 2400 14 Pelco P 9600 15 JVC 9600 16 GANZ 9600 *Only function of Ernitec protocol is fully verified. Select protocol: Pelco D, for instance, the ID switch should be set as below. decimal 2.
Orion/2 Outdoor The 22-pin connector definition is listed as below. No.
Orion/2 Outdoor 2.7 Alarm Pin Definition The alarm pins are serviceable for connecting alarm in- and output devices. Following lists the definition of alarm pin on the 22-pin connector located on the bottom of the dome camera. A 50-cm alarm cable is delivered with outdoor dome ZH811 for connecting alarm in- and output devices. Refer to section 2.1 Package Content. 2.
Orion/2 Outdoor 3. Operation and Configuration 3.1 OSD Display Format The information shown on the screen are described in terms of OSD display, position and function description in the table below.
Orion/2 Outdoor 3.2 OSD Menu Tree The OSD setup menu structure of E/F/U and R/K model are listed seperately in the following section. Ths star symbol indicates the factory default. For detailed function description, please see section 3.3 Configuration Menu. 3.2.
Orion/2 Outdoor Item HOME SETTING SEQUENCE AUTOPAN CRUISE IR FUNCTION ALARM DETECT Layer 1 Layer 2 HOME FUNC. SELECT MODE , PRESET SEQUENCE AUTOPAN CRUISE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> <001> ~ <128> Min. ENTER OFF ☆ <1> ~ <8> <01> ~ <32> <001> ~ <256> <01> ~ <15> <000> ~ <127> Sec. 1 01 001 01 000 PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE RETURN TIME GO EXIT SEQUENCE LINE SEQUENCE POINT PRESET POS.
Orion/2 Outdoor Item Layer 1 Layer 2 Layer 3 Default AUTOPAN CRUISE IR FUNC. NO FUNCTION PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE IR FUNCTION SCHEDULE RESET SCHEDULE EXIT YES EXIT OSD 3.2.
Orion/2 Outdoor Item HOME SETTING SEQUENCE AUTOPAN CRUISE Layer 1 Layer 2 PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> DWELL TIME EXIT HOME FUNC. SELECT MODE <001> ~ <127> Sec., ALWAYS YES , PRESET SEQUENCE AUTOPAN CRUISE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> <001> ~ <128> Min. ENTER YES <1> ~ <8> <01> ~ <32> <001> ~ <255>, <01> ~ <15> <000> ~ <127> Sec.
Orion/2 Outdoor Item Layer 1 SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE EXIT+SAVE SCHEDULE SWITCH SCHEDULE POINT SCHEDULE HOUR SCHEDULE MIN SCHEDULE MODE SCHEDULE EXIT OSD 19 NO FUNCTION PRESET SEQUENCE LINE AUTOPAN LINE CRUISE LINE IR FUNCTION SCHEDULE RESET SCHEDULE EXIT YES Layer 2 , <01> ~ <32> NONE PRESET SEQUENCE AUTOPAN CRUISE IR FUNC.
Orion/2 Outdoor 3.3 Configuration Menu The detailed functions and parameter settings of your high speed dome can be set by the OSD (On Screen Display) menu with a control device, such as Ernitec control keyboard. The functions in OSD menu are described in the following sections.
Orion/2 Outdoor 3.3.2 BACKLIGHT The Backlight compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object. 26x Model: Turn this item ; the center object will be brightened in contrast to the edge of the picture (where a backlight would most likely be located). 22/23x Model: The Backlight Compensation Level ranges from 000 to 100.
Orion/2 Outdoor • MANUAL In this focus mode, users can adjust the lens focus manually by pressing the Focus Near/Far button on the control keyboard or other control devices. 22/23x Model: • AUTO The optimum focus is achieved by the internal digital circuit. Users can adjust the minimum auto focus range for some special conditions; the options are <1 cm>, <10 cm>, <30 cm> and <1 m>.
Orion/2 Outdoor 3.3.5 AE MODE The exposure is the amount of light received by the image sensor and is determined by how wide you open the lens diaphragm (iris adjustment), by how long you keep the sensor exposed (shutter speed), and other exposure parameters. With this item, users can define how the Auto Exposure (AE) function works.
Orion/2 Outdoor 22/23x Model: • AUTO In this mode, the camera’s Shutter, IRIS and AGC control function work automatically to compensate the light exposure of image sensor for consistent video output level. IRIS OFF SET is used to set the level of IRIS variation. • SHUTTER With this option, the SHUTTER priority is higher than IRIS and AGC; IRIS and AGC circuit will function automatically in cooperating with SHUTTER to get consistent exposure.
Orion/2 Outdoor computes the white balance value output using color information from the entire screen. It outputs the proper value using the color temperature radiating from a black subject based on a range of values from 3000K to 7500K. • INDOOR 3200 K Base mode. • OUTDOOR 5800 K Base mode. • ATW Auto Tracing White Balance mode. The dome taking out the signals in a screen in the range from 2000 K to 10000 K.
Orion/2 Outdoor • OFF Hide the ID address of the selected dome. 3.3.8 SETUP MENU Users can adjust camera lens model parameters under SETUP MENUs. Depending on the model of dome cameras, the SETUP MENUs are different. 26x Model SETUP MENU1 FLIP ZOOM SPEED SPEED BY ZOOM AUTO CALI. DIGITAL ZOOM SLOW SHUTTER ANGLE ADJUSTER RESET EXIT ENTER 1 OFF OFF 12 OFF ENTER YES YES SETUP MENU2 APERTURE MASK DISPLAY 01 FIRST 22/23x Model SETUP PAGE FLIP ZOOM SPEED SPEED BY ZOOM AUTO CALI.
Orion/2 Outdoor M.E. The item is a standard mechanical operation. As the dome tilts 90°, it will pan 180°, then continuing tilt to keep tracking object. OFF Select this item to disable the flip function. NOTE: The dome will only be able to tilt 90°, or -10° ~100° with angle adjuster adjustments. • ZOOM SPEED This item is used to set the zoom speed for operating the dome camera. 26x Model: For these models, the zoom speed options are <1> (slow) ~ <8> (fast). The default is <8>.
Orion/2 Outdoor 26x Model: For these models, maximum 12× digital zoom function is allowed to be enabled. The default setting is . 22/23x Model: For the two models, Digital zoom ratio is adjustable from <1> to <12>. • SLOW SHUTTER The shutter speed determines how long the image sensor is exposed to light. To see clear image in a dark environment, enable this function and select a slower shutter speed.
Orion/2 Outdoor 3.3.9 SETUP MENU2 (26x Model Only) The Aperture and Mask Display settings can be configured under SETUP MENU2. SETUP MENU2 APERTURE MASK DISPLAY • 01 FIRST APERTURE Under this setup menu, users can adjust the enhancement of the edges of objects in the picture. There are 16 levels of adjustment; the options are <01> ~ <16>, <01> represents “no enhancement”. When shooting text, this function may help by making them sharper.
Orion/2 Outdoor 3.3.11 TITLE SETTING Up to 16 zone titles can be set with maximum 20 characters for each title; two mask zones are allowed to set in a view area. Users can name the zone titles with privacy mask ID numbers for future recognition. NOTE: For 23x model, the available area for setting privacy mask is restricted within tilt angle 45°. Follow the steps to set a camera title. STEP 1: Operate dome to certain view area where you want to set a title for it.
Orion/2 Outdoor ALARM SETTING ALARM PIN ALARM SWITCH ALARM TYPE ALARM ACTION PRESET POINT DWELL TIME EXIT • 1 OFF N.C. PRESET 001 ALWAY YES ALARM PIN The dome provides 8 alarm inputs and 2 outputs (1× N.O. and 1× N.C.). Select an alarm connector which you want to set its alarm-related parameters with this item, and then set its alarm-related parameters in Alarm Setting menu. For alarm pin definitions, please refer to section 2.6 Alarm Pin Definition or installation guide.
Orion/2 Outdoor SEQUENCE Select a sequence line that the dome camera should execute when alarm pin is triggered. The Sequence line should be defined prior in SEQUENCE setup menu. AUTOPAN Select an auto-pan line that the dome camera should execute when alarm pin is triggered. The Auto-pan line can be defined in setup AUTOPAN menu. CRUISE Select a cruise line that the dome camera should execute when alarm pin is triggered. The Cruise line can be defined in CRUISE setup menu.
Orion/2 Outdoor • SELECT MODE Select one of the modes that the dome should execute when HOME function is enabled and the RETURN TIME is up. The options are , , and . Use the left/right direction keys of the control keyboard to change the setting, and the bellowing items will change in cooperating with your selection. • PRESET Select a preset point where the dome should go when alarm pin is triggered.
Orion/2 Outdoor SEQUENCE SEQUENCE LINE SEQUENCE POINT PRESET POSITION SPEED DWELL TIME RUN SEQUENCE EXIT • 1 01 001 1 001 ENTER YES SEQUENCE LINE There are eight sets of sequence lines built in the dome camera. Using LEFT/RIGHT direction keys to select a line first and then set its sequence points. • SEQUENCE POINT Up to 32 points can be specified for each sequence line.
Orion/2 Outdoor • DWELL TIME The DWELL TIME is the duration time that the dome will stay at the sequence point, and the range is from <0> to <127> seconds. The dome will go to the next sequence point when the DEWEL TIME is up. If the setting is <0>, the dome will stay at this sequence point until users manually move the dome. • RUN SEQUENCE User can command the dome camera to run the selected Sequence line manually. • EXIT Select the item to exit the SEQUENCE menu. 3.3.
Orion/2 Outdoor • END POINT Users are able to set the end point after the start point is defined. Pan the dome to another position and press to save the position as the end point. • DIRECTION The item is for setting the AUTOPAN direction of dome camera. The dome will start to pan clockwise from the start point to the end point if your selection is , and then return to the start point.
Orion/2 Outdoor CRUISE RECORD START RECORD END RUN CRUISE EXIT • ENTER ENTER ENTER YES RECORD START Follow the description to record the CRUISE path. 1. Rotate the dome camera to a desired view area, and press to build the cruise path using joystick on the control device. The percentage of the memory buffer will be displayed on the screen. 2. Pan, tilt the dome camera to form a path. The zoom setting is only available with 26x model. NOTE: Beware of the memory size when building the cruise path.
Orion/2 Outdoor • ON Select the item to remove the IR cut filter. 23x Model: IR FUNCTION THRESHOLD IR COLOR EXIT • LOW COLOR YES AUTO The Internal circuit will automatically decide the occasion to remove the IR cut filter according to the image brightness level. THRESHOLD The dome will remove the filter immediately when the threshold value is reached. The threshold options are , and . threshold indicates a higher sensitivity and can improve the reliability of lens.
Orion/2 Outdoor INT. FOCUS The alarm will be triggered if the internal focus changes; and if the focus returns to the original position, the alarm will stop. FIX FOCUS If focus movement is detected, the alarm will be triggered, and the alarm stops when focus returns to the original position. If the detected focus movement keeps changing for more than four seconds, the new focus position will be memorized as the reference and the alarm will stop. NOTE: The INT.
Orion/2 Outdoor • WDR FUNCTION This item is used to define the WDR function mode. AUTO If select , the dome camera operates the WDR function automatically. MANUAL Users are allowed to adjust WDR function manually by defining the RATIO LEVEL, SHUTTER SPEED and IRIS OFFSET value. WDR MODE RATIO LEVEL SHUTTER SPEED IRIS OFFSET EXIT • 000 000 000 YES EXIT Exit this setup menu. 3.3.20 PRIVACY The Privacy Mask function aims to avoid any intrusive monitoring.
Orion/2 Outdoor • COLOR The color of privacy mask can be set through this item. The available colors are black, heavy gray, light gray, white, red, green, blue, cyan, yellow and magenta. • SET MASK Use the control device to move the dome camera to the area whether you want to set a mask. Press to enter MASK SETUP MENU. The dome will memorize this position as privacy mask position. Up to 24 masks can be set.
Orion/2 Outdoor • SHADE The color of privacy mask can be selected through this item. The available colors are black, gray and white. • SET MASK After pressing on this item, dome will memorize this position as privacy mask position, up to 8 masks can be set. The model restricts the mask zones to be set too close with each other. MASK01 MENU H CENTER V CENTER H SIZE V SIZE EXIT+SAVE 000 000 000 000 YES H CENTER (000~256) The original center of mask zone is the center of screen.
Orion/2 Outdoor LAST If select this mode, the camera will move the dome to the preset point, then display the mask zone. NOTE: For K model, the available area for setting privacy mask is restricted within tilt angle 45°, and two mask zones are allowed to set in a view area. • EXIT Exit this page. 3.3.21 TIME FUNCTION The item is used to set the TIME related parameters of the integrated high speed dome.
Orion/2 Outdoor SCHEDULE SCHEDULE SWITCH SCHEDULE POINT SCHEDULE HOUR SCHEDULE MINUTE SCHEDULE MODE PRESET POINT SCHEDULE RESET SCHEDULE EXIT • ON 01 11 53 PRESET 001 YES YES SCHEDULE SWITCH Select to enable the Schedule function or to disable. • SCHEDULE POINT Users are allowed to set up 32 schedule points. • SCHEDULE HOUR / MINUTE The items are for setting up the time of schedule points.
Orion/2 Outdoor Appendix A: Technical Specification Series Orion/2; Type: Type Sensor Horizontal resolution Eff.
Orion/2 Outdoor Appendix B: Ernitec ERNA The dome camera can be controlled by Ernitec systems via RS485. The setup function is based on an On Screen Display (OSD) menu driven system. Using System X Keyboards Series K111 To enter the menu system, press: MENU Use the joystick to navigate inside the menu system. To enter a sub-menu or accept/select an entry, press: MENU To Exit select the EXIT OSD entry. After a certain time of inactivity the menu system is left automatically.
Orion/2 Outdoor Operation Only functions not mentioned in, or deviating from, the System X, SYSTEM 500M/1000M or Keyboard 150xM user manual or user instructions are listed here. Iris function The iris function keys does not actually operate the lens iris, but should be considered similar to a Brightness control. The following functions are all selected by calling or saving presets. Run Preset Tour 1-4 v Call preset 10x, where “X” represents Tour 1, 2, 3 or 4.
Orion/2 Outdoor Appendix C: Protocol-Pelco The speed dome can be controlled through a keyboard which built in D protocol and P protocol. Please follow the instruction to manipulate our Speeddome with a keyboard which built in D protocol and P protocol. Symbol Definition A single button which can command a dome to go to specific preset position. (1) A single button which can set preset parameter ( D Protocol).
Orion/2 Outdoor Cable Definition (P Protocol Keyboard to Speed Dome) Tx+ 8 Tx- 7 6 + 12V 5 1 Tx+ 2 + 12V 3 GND GND 4 4 Rx+ 5 Rx6 Tx- Rx- 2 Rx+ 1 For P Protoc ol Ke yb oa rd Fo r Sp ee d Dom e Cable Definition (D Protocol Keyboard to Speed Dome) Tx - 6 Tx+ 5 GND 4 1 Tx+ 2 3 GND GND 3 Rx- 2 Rx+ 1 4 Rx+ 5 Rx6 Tx- Fo r D Pro toc ol Ke yb oa rd 49 For Sp eed Dom e
Orion/2 Outdoor Appendix D: Philips Allegiant The dome cameras can be integrated into Philips Allegiant systems through D77R3 repeaters. Please follow the instructions to control dome cameras through Philips Allegiant systems. Symbol Definition A physical single button : Command dome cameras to go to specific preset position. A physical single button : Set preset position. Special Function 7 6 1. Exit OSD menu direct 1. Open or close OSD menu. 7 7 2.
Orion/2 Outdoor OSD Menu Notes The following OSD menu tables are provided for users to record the dome settings. 26x Model Item Layer 1 DEFAULT CAMERA , BACKLIGHT , AUTO MANUAL AUTO BRIGHT SHUTTER GAIN IRIS AUTO (Auto White Balance) INDOOR OUTDOOR ATW (Auto-tracing WBC) MANUAL FOCUS AE MODE WBC MODE ID DISPLAY SETUP MENU 1 SETUP MENU 2 TITLE DISPLAY TITLE SETTING ALARM SETTNG , FLIP ZOOM SPEED SPEED BY ZOOM AUTO CALI.
Orion/2 Outdoor Item AUTOPAN CRUISE IR FUNCTION ALARM DETECT PRIVACY TIME Layer 1 SEQUENCE POINT PRESET POS.
Orion/2 Outdoor 22/23x Models Item DEFAULT CAMERA BACKLIGHT FOCUS APERTURE AE MODE WBC MODE ID DISPLAY SETUP MENU TITLE DISPLAY TITLE SETTING Layer 1 , ON OFF AUTO MANUAL AUTO MANUAL AUTO SHUTTER IRIS AGC AUTO MANUAL , FLIP ZOOM SPEED SPEED BY ZOOM AUTO CALI.
Orion/2 Outdoor Item CRUISE Layer 1 SPEED RUN AUTOPAN EXIT RECORD START RECORD END RUN CRUISE EXIT AUTO IR FUNCTION (23x model only) ON WDR SWITCH WDR FUNCTION WDR SETTING (23x model only) EXIT PRIVACY SWITCH SHADE SET MASK PRIVACY (23x model only) TIME MASK CLEAR+RESET MASK DSIPLAY EXIT TIME DISPLAY SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE EXIT+SAVE SCHEDULE SWITCH SCHEDULE POINT SCHEDULE HOUR SCHEDULE MIN SCHEDULE MODE SCHEDULE EXIT OSD NO FUNCTION PRESET SEQUENCE LINE AUTOPAN LINE CRUISE LI