operation manual

2 Turn the length setting adjustment ring to set
the comb attachment to the desired setting.
The arrowhead on the appliance indicates which ,
setting you have selected.
Tip: Use different settings to create a natural and
smooth transition between the various hair lengths
from your neckline to the top of your head.
Do not turn the length setting adjustment ring
beyond the highest setting.
3 Turn the swivel head to the position that is
most comfortable for your arm when you clip
the different parts of your head.
Using the swivel head
- From its starting position of 0° (pointing
forwards), you can turn the swivel head 45° or
90° to the left or right. This enables you to adjust
the position of the cutting element to the part
of your head that you are clipping. This makes it
much easier to clip your own hair.
- To set the cutting element to the desired position,
turn the swivel head (‘click’).
Note: Always adjust the position of the cutting element
by turning the swivel head. Do not turn the cutting
element or the comb attachment.
Note: Do not turn the swivel head more than 90° to
the left or right.
– 5
– 7
– 9
– 11
– 15
7
5
2
1
45º
180º
90º
0º
45º
90º
ENGLISH
25
QC5570EN_P20-35_A6_CS3 25 12.12.14 6:27:41 PM