operation manual

the comb attachment to pre-cut hairs to the shortest
setting.
1 Switch off the appliance.
2 Pull the comb attachment off the swivel head.
3 Press the release buttons (1) and remove the
cutting unit from the handle (2).
4 Attach the shaving head by pressing it onto the
appliance (‘click’).
Make sure that the shaving head locks into position
properly.
5 Remove the protection cap from the shaving
head.
6 Adjust the position of the swivel head to make
shaving easier. You can do this before and/or
during use.
2
1
ENGLISH
28
QC5570EN_P20-35_A6_CS3 28 12.12.14 3:54:36 PM