operation manual

5 Rinse the cutting element under the tap or

clean it with the cleaning brush supplied.

6 Rinse the inside of the appliance under the tap

or clean it with the cleaning brush supplied.

7 Insert the lug of the cutting element into the

slot (1) and push the cutting element back

onto the swivel head (2).

Cleaning the shaving head

Note: Regulary check the shaving foil for cracks.

1 Switch off the appliance and disconnect it from

the mains.

2 Press the release buttons on the shaving

head (1) and remove the shaving foil from the

shaving head (2).

3 Rinse the shaving head and shaving foil under

the tap.

Note: To clean the shaving head with the cleaning

brush, brush the inside and outside of the shaving head

and the outside of the shaving foil. To remove cut hairs

ENGLISH

QC5570EN_P20-35_A6_CS3 30 12.12.14 3:54:38 PM