operation manual

5 Push out the inner body by pushing the
screwdriver into the bottom of the handle.
-
Now you see the printed circuit board.
6 QP6510: remove the cover of the printed circuit
board with the screwdriver.
7 Remove the printed circuit board from the inner
body with the screwdriver.
8 Lift the battery out of the inner body with the
screwdriver. The battery is connected with
double-sided tape.
Warning: Be careful, the battery strips are
very sharp.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
Guarantee restrictions
The blade is not covered by the terms of the
international guarantee because it is subject to
wear.
21
English