User manual

, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program aborts. In this case, the rinsing or drying
symbol goes out.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and
charging have been completed, the SmartClean
switches off automatically.
Replacing the cartridge of the SmartClean
System
- Replace the cleaning cartridge when the
replacement symbol ashes orange or when you
are no longer satised with the result.
1 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
2 Take the empty cleaning cartridge from the
SmartClean system and pour any remaining
cleaning uid out of the cleaning cartridge.
You can simply pour the cleaning uid down the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull the
seal off the cartridge.
ENGLISH28