User manual

Problem Possible cause Solution
The shaver does
not work when I
press the on/off
button.
The shaver it still
attached to the
mains. For safety
reasons, the shaver
can only be used
cordlessly.
Unplug the shaver and press
the on/off button to switch
on the shaver.
The rechargeable
battery is empty.
Recharge the battery
(see chapter ‘Charging’).
The travel lock
is activated.
Press the on/off button for
3 seconds to deactivate the
travel lock.
The shaver does
not shave as
well as it used
to.
The shaving heads
are damaged or
worn.
Replace the shaving heads
(see chapter ‘Replacement’).
Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads
(see chapter ‘Cleaning and
maintenance’).
Clean the shaver thoroughly
before you continue shaving
(see chapter ‘Cleaning and
maintenance’).
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
You have not reset
the shaver.
Reset the shaver by pressing
the on/off button for
approx. 7 seconds
(see chapter ‘Replacement’).
ENGLISH38