Wireless TV Link User Manual SLV5400
A 1 2 3 4 5 6 8 9 7 10 11 IR 15 14 B 12 C 20 19 13 21 18 22 17 16 23 WIRELESS TV LINK RECEIVER G 24 25 25 25 25
EN Contents Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 7 Enjoy your Wireless TV Link Use additional features 7 9 Troubleshooting 10 Information 12 Health and safety Maintenance and service Recycling and disposal Warranty Glossary 12 12 12 13 13 3
EN Overview Control and display elements A Transmitter 1 On/off switch 2 Power light: > red: standby > green: on > blinking: remote control signalling 3 RECORD SOURCE button 4 Link source indication lights 5 TV1 SOURCE button 6 AUTO light 7 Integrated remote control blaster light 8 TV1 source indication display 9 Antenna 10 SCART ports: > 1-SAT/STB > 2-AUX > 3-DVD (for RGB signals) > 4-VCR/DVD recorder (for RGB signals) 11 Wireless channel selection switch 12 Power input connector (DC 12V) 13 AUDIO OUT con
Your Wireless TV Link EN You can say good-bye to wires. With your Wireless TV Link you can now wirelessly connect a second TV and choose between four devices to watch on your second TV. Safety • • • • • • • • • Read the instructions in this manual carefully before you connect, install and use the product. Keep this manual for future reference. The product is for indoor use only. Do not use the product close to water. Do not expose the product to extreme heat.
EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Install the remote control blaster cord 1 Switch off the transmitter (A). STANDBY SELECT SLV5400 WIRELESS TV LINK TRANSMITTER IR 2 Connect the remote control blaster cord (G) to the IR port. 3 Position the blaster light in front of the video source. See the user manual of the video source for the exact location of the IR sensor on the front panel.
Installation EN Remove interference on TV2 1 Find the CHANNEL switch on the transmitter (A). 2 Set the CHANNEL switch to different number. L R DC 12V Channel 1234 3 Find the CHANNEL switch on the receiver (B). 4 Set the CHANNEL switch to the same number as on the transmitter. CHANNEL 1 2 3 4 Operation Enjoy your Wireless TV Link For basic operation, see the quick start guide that came with your Wireless TV Link.
EN Operation 7 Press + or - on the receiver (B) to select the VCR or DVD recorder; or: press 4 on the remote control (C). 8 Select the channel on the VCR or DVD recorder with its remote control. Turn off the auto standby mode when you use the VCR or DVD recorder to watch a cable tv program. Refer to the user manual of the VCR or DVD recorder. If the VCR or DVD recorder records a television program, you watch the recorded channel.
Operation EN Use additional features Use VCR/DVD recorder features SELECT SAT/STB AUX DVD PLAYER 1 2 3 CONNECT 4-VCR/DVD RECORDER 1 Select a video source with SELECT. > The signal of the video source is connected to the VCR/DVD recorder. 2 Select the correct SCART input on the VCR or DVD recorder. 3 Push RECORD on the VCR or DVD recorder. 4 Push PLAY on the video source. > The VCR or DVD recorder now records the image of the video source.
EN Troubleshooting Problem Tip No image or wrong • Make sure video sources are connected to the transmitter (A). image on TV1 • Make sure the transmitter (A) is connected to TV1. • Make sure SCART cables are firmly inserted. • Make sure the video source is switched on. • Make sure the correct SCART input on TV1 is selected. • Select the correct video source with TV1 source. See page 8. No image or wrong • Make sure SCART cables are firmly inserted.
Troubleshooting EN Problem Tip Interference in the • Slightly change the position of the receiver (B) or the transmitter (A). image on TV2 • Change the wireless channel that is used for communication. See page 7. • The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. The video sources • Point the remote control directly to the receiver (B).
EN Information Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image. The product is based on RF technology.
Information EN Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. Glossary CVBS Easylink RCA RF technology SCART Video standard for showing colors on a TV.
AQ95-56F-613KR (report No.) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics B.V., P&A CC: Building SBP6 (manufacturer's name) P.O.
Need help? Troubleshooting See page 10 Online help: www.philips.com/support Helpline België/Belgique/Belgien Danmark Deutschland España France ÅëëÜäá Ireland Italia Luxemburg/Luxembourg Nederland Norge Österreich Portugal Schweiz/Suisse/Svizzera Suomi Sverige UK (United Kingdom) 070 222 303 (€ 0.17) 3525 8759 0900 1101211 (€ 0.12) 902 888 784 (€ 0.15) 08 9165 0005 (€ 0.23) 0 0800 3122 1280 01 764 0292 899 23 45 06 (€ 0.25) 40 6661 6544 0900 8407 (€ 0.20) 2270 8111 0900 060 827 (€ 0.