User manual

11
D Note:
Ifthewatersupplystopswhilethe
appliancedispensesinmanualmode,the
purewaterdispenserswitchestoAUTO
mode f.
Ifyouwanttoprogramthepurewater
dispenser to dispense at a later time
(whenwatersupplyresumes),pressthe
LITRESbuttontosetawaterquantity.
The display shows the set quantity.
The pure water dispenser is now ready
to dispense the set quantity automatically
once the water supply resumes.
6.0.2 Purifying in AUTO mode
1  Pressthepower-onbuttononthepure
water dispenser. Wait until the dispense
button
dashes.
2  PresstheMODEbutton
The pure water dispenser goes into AUTO
mode f.
The dispense button
d goes out and
thedisplayashes.
3  PresstheLITRESbuttontosetthedesired
water quantity.

increases by 0.2 litres each time you press the
button.


Once you have set the quantity, the dispense
button dashes.
4  Pressthedispensebuttond
Theappliancedispensespuriedwater.
The display counts down as the water is
dispensed (i.e. the display shows the amount
of water still to be dispensed).
The pure water dispenser automatically
stops when it has dispensed the set quantity.
The display retains the previously set
quantitysothatyoucanllmultiple
containers of the same capacity.
To cancel/reset the existing setting, either

mode) or press the power-on button to
switch off the dispenser.
•
•
•
•
•
•
•
•
•
•
6 Using the appliance
1  Openthetapconnectedtothepurewater
dispenser.
2  Whenyouusetheappliancefortherst
timeorifyouhavenotusedtheappliance
for2daysormore,usethePureFlush
function.Seesection‘PureFlush’inthis
chapter.
6.0.1 Purifying in manual mode
1  Pressthepower-onbuttononthepure
water dispenser
Allindicatorsashonandoff.
The power-on indicator y goes on.
The display goes on.
WP3893 only: If mains power is available,
the battery indicator
z lights up green.
If there is no mains power available, the
battery indicator lights up red. During
charging,thebatteryindicatorashes
green. When the battery is almost empty,
thebatteryindicatorashesred.
The pure water dispenser checks the water
availability,thelterandtheUVlamp.
Asthepuricationprocessproceeds,rst
theredsegmentofthepuricationstage
indicator e lights up, followed by the yellow
segment.Whenthepuricationprocess
isnished(after30seconds),thegreen
segment lights up.
The dispense button dashes(default
mode= manual).
2  Pressthedispensebuttond
The pure water dispenser dispenses water.
The display shows the quantity of dispensed
water and the dispense button lights up
green.
3  Tostopthewaterow,pressthedispense
button
d again.
Thedispensebuttonashesandthe
appliance is ready to dispense again.
•
•
•
•
•
•
•
•
•
ENGLISH