User manual

12
When the water supply resumes, the
pure water dispenser dispenses the set
water quantity and stops automatically.
After10minutes,thepurewaterdispenser
goes into stand-by mode again.
D Note:
Instand-bymode,whentheappliance
iswaitingforwater,theindicatorsand
thedisplayareoff,exceptthepower-on
indicator y,thebatteryindicatorz and
thewateravailabilityindicator
b(ashes).
Afterwaterhasbeendispensed,thepreset
quantityremainsvisibleonthedisplay.
6.0.4 Charging the battery (type WP3893)
Charge the battery for 14 hours before you use

this, it takes 12 hours to charge the battery fully.
D Note:
Leadacidgelbatterieslosecapacityiftheyare
notchargedregularly.Theperformanceand
functionalityofthebatterydependsdirectly
onthechargingpattern.Chargethebattery
regularlyandalwayschargethebatteryfully.
1  Pressthepower-onbutton.
During charging, the battery indicator z
ashesgreen.
When the battery is fully charged,
the battery indicator lights up green
continuously.
D Note:
Thepurewaterdispenserswitchestostandby
(powersaving)modeafter10minutesbutthe
batterycontinuestocharge.
6.1 Other functions
6.1.1 PureFlush
Use the PureFlush function when you use the

function if you have not used the appliance for
more than 2 days:
•
•
•
•
•
•

button.
D Note:
Ifthewatersupplystopswhilethe
appliancedispensesinAUTOmode,the
purewaterdispenserprogramsitselfto
dispense at a later time.
Thedisplayshowsthequantitystilltobe
dispensed.Ifdesired,youcanchangethis
quantity.
Oncethewatersupplyresumes,thepure
waterdispenserdispensesthepending/
changed quantity.
Makesurethatyouplaceacontainer
oftheappropriatecapacityunderthe
appliancetocollectthepuriedwater.To
canceltheexistingsetting,switchoffthe
pure water dispenser.
6.0.3 Setting the pure water dispenser when
water is not available
1  Pressthepower-onbutton.
When water is not available, the pure water
dispenser switches to AUTO mode f.
The water availability indicator b lights up
red.
Thedisplayashes.
2  PresstheLITRESbuttontosetthewater
quantity you want the appliance to dispense
when the water supply resumes.
The dispense button dashes.
3  Placeacontainerofappropriatecapacity
under the pure water dispenser to collect
thepuriedwater
4  Pressthedispensebutton
The dispense button
d goes out.
The water availability indicator bashes,
which means that the pure water dispenser
has programmed itself to start dispensing
when the water supply resumes.
After10minutestheappliancegoesinto
standby mode, waiting for the water supply
to resume.
•
•
•
•
•
•
•
•
•
•
•