User manual

14
7.0.3 Cleaning the quartz tube

every 6 months.
B Warning:
Handlethequartztubewithcare,asitmight
breakandcauseinjury.Donottamperwiththe
quartztube(applyglue,etc.).
1  Switchoffthepurewaterdispenser.
2  OpenthecoveroftheUVchamber.
3  ToremovetheUVlampunit,followsteps1
to5insection‘ReplacingtheUVlampunit’.
4  Pulloutthequartztubewiththerubber
ring.
5  Removetherubberring.
6  Cleanthequartztubewithacleanmoist
cloth and dry it completely.
7  Reinserttherubberringtoadepthof2-
3mmfromtheopenend.
7 Cleaning and
maintenance
7.0.1 Cleaning the pure water dispenser
B Warning:
Neverusescouringpads,abrasivecleaning
agentsoraggressiveliquidssuchaspetrolor
acetone to clean the appliance.
B Warning:
Donotpourwateroverthepurewater
dispenser.
1  Cleantheoutsideofthepurewater
dispenser regularly with a damp (not wet)
cloth.
2  Ifyouhavenotusedtheappliancefor2days
ormore,performthePureFlushprocedure
(seechapter‘Usingtheappliance’,section
‘PureFlush’).
7.0.2 Cleaning the macro lter
1  Switchoffthepurewaterdispenser.
2  Turnoffthewatersupplytothepurewater
dispenser.
3 Unscrew the water inlet connector (hold it
inverticalpositiontoavoidwaterspillage)
andpulloutthemacrolter.
4  Rinsethemacrolterunderarunningtap.
Removethedirtfromthemesh.
5  Putthemacrolterbackinitsoriginal
position.
6 Reattach the water inlet connector.