User Manual

10 STUDIO WIZARD
Speaker Select Section
34. Mini Button
Press this button to send the selected inputs to
the mini speaker output on the main unit.
35. Main Button
Press this button to send the selected inputs to
the main speaker output on the main unit.
36. Alternative Button
Press this button to send the selected inputs to
the alternative speaker output on the main unit.
Fader
37. Fade In Time Control
Adjust this knob to set the fade in time.
38. Fade Out Time Control
Adjust this knob to set the fade out time.
39. Master Button
When the Master key is activated, the auto fader
only applies to the speaker (or monitor) outputs.
If the Master key is not activated then auto fad-
ing applies to all outputs.
40. Auto Button
Pressing this button automatically fades the se-
lected signal, whether it be the speaker output
only or all outputs simultaneously.
41. Dim Level
This knob adjusts the amount of attenuation ap-
plied when the Dim button is pushed.
42. Dim Button
Press this key to instantly attenuate the main
output level by the amount selected. It is highly
useful when receiving phone calls or communi-
cating with the talent.
43. Mono Button
This button sums the stereo signal to mono to
check for phase cancellation.
44. Cut Left
This button cuts the output to the left channel
monitors.
45. Cut Right
This button cuts the output to the right channel
monitors.
46. Mute
This button mutes the audio to the Main speaker
output.
Talkback Section
47. To Alt. Speaker Button
Press this button once and release to route the
talkback microphone signal to the alternative
speaker outputs.
48. To Studio Button
Press this button once and release to route the
talkback microphone signal to both the Studio
and Headphone outputs.