User Manual

11
STUDIO WIZARD
49. To Record Button
Press this button once and release to route the
talkback microphone signal to the REC outputs.
50. Talkback Button
After selecting the destination for the talkback
microphone signal, press and hold the Talkback
key to use the talkback microphone. Press the
button twice in quick succession to keep the talk
back on. Push once more to turn
the talk back off.
51. Talkback Microphone
This built-in condenser talkback
microphone has a sensitivity of
-42dB and a gain range of 15 dB
– 55 dB.
Main Section
52. Level Control Knob
This large rotary knob provides a precise analog
control for the monitor speaker output level. It is
accompanied by a digital display that gives an
exact level readout. This knob controls the level
only for those monitor speakers that are current-
ly selected in the Speaker Select zone.
53. Digital LED Display
This LED display provides a precise numeric
readout for all level control changes. The default
display is the monitor level control. When any
of the Studio Select, Fade Time or Dim Level
knobs are adjusted, changes will be displayed
on the LED panel. One to two seconds after level
changes have been made, the LED will return to
displaying the monitor level.
54. Phase Meter
This is an accurate 11-segment LED meter for
monitoring the phase of the monitor speaker out-
puts. When the meter’s illuminated LED indica-
tor sits between the 0 and +1 mark, your signal
is in-phase. When the signal sits to the right of
the meter, the signal is out of phase, and should
be corrected. Please note that this phase meter
checks the phase of stereo signals only.
55. Output Level Meter
This is an accurate dual 20-segment meter for
monitoring the monitor speaker outputs.
Rear Panel
56. RJ-45 Jack
This is an RJ-45 jack. The
cable that connects this unit
to the main unit is plugged
in here.