Manual

lightingschool
product tutorial videoswww.photoflex.com®
LiteReach Plus Instruction Manual • Item: AC-LTREACHPLS
LiteReach™ Plus
The LiteReach Plus is designed to provide handheld extension
of LitePanel frames (using the LitePanel
®
Hardware) or various
softboxes and light combinations. Figure 1
Attachment of the LiteReach™ Plus to LitePanel Frames
Note: The assembled LitePanel frame should have the LitePanel
Hardware & the swivel mount component securely attached in
the horizontal position at the center of the frame’s width.
Tip: Put the swivel handle on your left side when attaching it to
the mounting track. In this way, gravity works with you allowing
the weight of the LitePanel to further tighten the swivel rather
than loosen it.
Step 1 Insert the LiteReach Plus top stud into the LitePanel
hardware swivel mount receiver. Figure 2
Step 2 Securely tighten the swivel mount set screw. Figure 3
Step 3 With the frame and hardware assembly attached securely
to the LiteReach Plus; extend the sections of the LiteReach
!
maximum strength of the extended pole. Make sure that the set
screw knobs and swivel handle are securely tightened before
lifting the assembly. Figure 4
Attachment of the LiteReach™ Plus to Portable Strobe and
softbox assemblies
The LiteReach Plus can be attached to virtually any portable
light or rig that has a 5/8” receiver such as battery powered
strobes or speedlight and softbox applications. Figure 5
Using the LiteReach™ Plus
There are two recommended methods in which you can safely
"#!$%
'!$*
rubberized resistance ball against your waist with your hands
tightly holding the foam grips. Figure 6
'!
extensions. The rubberized ball can be placed on the ground
to support most of the weight. The ball will provide resistance
against slipping although it is recommended that you also place
one foot behind the ball to provide an anchor point. Figure 7
'$"#
Figures 8 and 9
Figure 2
Figure 3
Figure 5
Figure 7
Figure 9
Figure 6
Figure 8
Figure 4
Rev 7/18/13
5 YEAR PHOTOFLEX
®
WARRANTY
• The LiteReach Plus has a Five Year Warranty
• Warranties only cover manufacturer’s defects and workmanship
• We reserve the right to inspect all merchandise returned (end users
and dealers) for warranty fulfillment.
• All returns must be accompanied by a receipt showing date of
purchase.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
Customer Support [phone]
email: [e-mail]
Corporate Office [phone] • FAX [phone]
97 Hangar Way, Watsonville, CA 95076
+-01234""#367'9#:9:#:<"#
®

®

==>!?9
countries.
Figu
re
Figure 1