USE AND CARE GUIDE FLOOR LAMP-K/D 3 POLES-150W Above image represents many lamps, your lamp may vary in style. Questions, problems, missing parts? Before returning to the store, call Kenroy Home Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lamp. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation ............................................................................................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This lamp requires the use of one 120V, 60HZ, 150-Watt max, medium-base type A 3-way bulb (not included). Do not exceed the recommended wattage.
Assembly instructions 1. Unpack the lamp and assemble lower & middle poles □ Carefully organize and place all parts on a smooth, flat surface. line up all of the parts according to the assembly diagram. □ Screw the lower pole (H) to top of the base (I). G □ Screw the middle pole (G) to top of the lower pole (H). H I 2. Assemble the upper pole & socket assembly □ Screw the upper pole (F) to top of the middle pole (G). E □ Pull the excess power cord through base (I).
Assembly instructions (continued) 3. Assemble the harp □ Squeeze legs of the harp (D) together and insert the two ends between the prongs of the harp holder. 4. Assemble the shade □ Place the shade (C) onto the harp (D). □ Secure the shade (C) to harp (D) with rubber washer (B) and finial (A).
Assembly instructions (continued) 5. Install the bulb □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install the 120V, 60HZ, 150-watt max. medium-base type A 3-way bulb (not included) into the socket of the light lamp. NOTES: Make sure a 3-way bulb is being used and that the bulb is fully screwed into the base of the socket. this may require an extra turn of the bulb.
Important safety instructions □ This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Care and Cleaning □ Clean the lamp with a soft, dry cloth.
www.kenroyhome.com CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.