Installation Instructions

5. Install the bulb
□ Prior to installing the bulb, inspect socket for silica packet. If packet is
present, then remove and throw away. Do not expose it to children or pets.
□ Install the 120V, 60HZ, 150-watt max. medium-base type A 3-way bulb
(not included) into the socket of the light lamp.
NOTES: Make sure a 3-way bulb is being used and that the bulb is fully
screwed into the base of the socket. this may require an extra turn of the bulb.
□ Plug cord into an outlet and turn on at the switch.
Assembly instructions (continued)
Bulb
(not included)
Socket
Switch