Instructions / Assembly

1. Weave the fixture wire and fixture ground wire
through the stems and swivel.
2. Install swivels and stems on of the fixture.
Install stems based on the desired length of
the item on the fixture.
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 8
STEP 4
1. Attach the lanyards on to the mounting unit.
2. Make the electrical connection from the
junction box to the fixture. Connect the
ground wire to the mounting unit using the
preinstalled green ground screw. Then,
connect the positive, negative and
ground wires with the supplied
wire nuts. Secure with electrical tape.
STEP 7
1. Weave the fixture wire and
fixture ground wire through
the ceiling plate, baseplate,
ground wire, lanyards,
washer and decorative nut.
2. Install baseplate, lanyards,
ground wire and swivels on of
the ceiling plate, and secure
with washers and decorative nuts.
STEP 5
Attach the mounting unit to
the junction box using the
mounting screws.
Secure mounting unit to
ceiling with wood screws
and wall anchors.
STEP 6
Attach the ceiling plate to the mounting unit through
screw holes as shown, and secure it with ball nuts.
STEP 9
Install bulbs (not included)
1
2
Copper
Silver
Smooth
Ridged