User Manual

03_21

03_22

03_23

1. Position the unloaded vehicle, in running order and with the tyres inflated to the

prescribed pressure, on a flat surface 10 m away from a half-lit white screen; ensure

that the longitudinal axis of the vehicle is perpendicular to the screen;

2. Remove the headlight assembly central cover

3. Turn on the headlight and check that the limit of the projected light beam is not over

9/10 or below 7/10 of the distance from the ground to the centre of the vehicle head-

light;

4. Otherwise, adjust the headlight with the screws«A» indicated in the figure

N.B.

THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-

GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE

STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE ve-

hicle IS USED.

3 Maintenance