Operation Manual

Final step - red key

After pulling out the last black key, insert the red key again and turn it to "ON" (this

operation should be performed within 10 seconds of pulling out the previous key).

Leave it in this position for 1 to 3 seconds and return it to the «OFF» position.

Proper programming check

Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the

key to "ON". Perform the engine start-up operation. Ensure that the engine does not

start. Insert the black key and repeat the start-up operation. Check that engine starts.

WARNING

SHOULD THE ENGINE START WITH THE RED KEY (WITH TRANSPONDER OFF),

OR IN THE EVENT OF WRONG OPERATION DURING PROGRAMMING, REPEAT

THE PROCEDURE FROM THE BEGINNING.

01_14

Accessing the fuel tank (01_14, 01_15)

Insert the key into the switch and press down until the glove box opens. In the event

that the key switch is in «LOCK», turn the key to «OFF» or «ON» before pressing

down. Press lever «B» and open the cover over the fuel tank cap «C».

1 Vehicle