Operation Manual

Possible Cause Operation
Muffler welding
Engine revs irregularly
ENGINE IRREGULAR PROGRESS WITH VALVE SLIGHTLY OPEN
Possible Cause Operation
Intake system cleaning Air filter
Diffuser and throttle valve
Additional air pipe and Stepper
Intake system seal Intake sleeve
Filter box
Ignition system Spark plug wear check
Parameter reliability Throttle valve position signal
Coolant temperature indicator
Intake air temperature indicator
Ignition advance
TPS reset successful TPS reset successful
Presence of faults detected by the self diagnosis Pump relay
HV coil
Injector
revolution timing sensor
Air temperature
Coolant temperature
Lambda sensor
Poor performance at full throttle
POOR ENGINE PERFORMANCE AT FULL POWER/ ENGINE IRREGULAR PROGRESS
ON PICKUP
Possible Cause Operation
Presence of faults detected by the self diagnosis Pump relay
HV coil
Injector
revolution timing sensor
Air temperature
Coolant temperature
Lambda sensor
Spark plug power supply Spark plug
Shielded cap
HV cable
HV coil
Intake system Air filter
Filter box (sealing)
Intake sleeve (sealing)
Parameter reliability Throttle valve position signal
Coolant temperature indicator
Intake air temperature indicator
Ignition advance
Fuel supply Fuel level in the tank
Fuel pressure
Fuel filter
Injector capacity
MP3 250 i.e. Injection
INJEC - 11