Operation Manual

TRANSPARENCY
Specification Desc./Quantity
1 Fuel injector
2 Throttle body and electronic injection control
unit (MIU)
3 Diagnostics socket connector
4 Battery 12V - 12 Ah
5 Engine rpm sensor
6 HV coil
7 Lambda sensor
8 Fuel pump
9 Water temperature sensor
10 Injection load remote control
11 Instrument panel
Tachometer
With wiring disconnected from the control unit and
connected to the system, check that the sensor
resistance between pins 13 - 15 is between 100
and 150 Ohm at an engine temperature of approx-
imately 20°
Injection MP3 250 i.e.
INJEC - 30