Operation Manual

Remove the four screws indicated in the figure,
remove the flexible transmission supporting brack-
et, separate the two crankcase halves, if neces-
sary, use a rubber mallet to hit the flexible
transmission lever in order to separate the two
crankcases.
Remove the retaining seeger ring of the bearing of
the flexible transmission lever control shaft bear-
ing.
Remove the bearing with the specific tool.
Specific tooling
020376Y Adaptor handle
020441Y 26 x 28 mm adaptor
020362Y 12 mm guide
Extract the electric motor bearing with the specific
tool.
Specific tooling
020376Y Adaptor handle
020375Y Adaptor 28 x 30 mm
020363Y 20 mm guide
MP3 250 i.e. Suspensions
SUSP - 19