Operation Manual

Removal

Remove the split pin.

Use new split pins when refitting.

Undo the wheel hub nut.

- When refitting, secure to the specified torque.

Locking torques (N*m)

Wheel axle nut 74 ÷ 88

Remove the seeger ring, after that, remove the

hub with the help of a rubber mallet slightly hitting

on the brake disc side, turning the wheel hub at the

same time.

Loosen the 6 screws indicated in the figure and

remove the brake disc from the wheel hub.

- When refitting, secure to the specified torque.