Operation Manual

Remove front Shield.
Remove front wheel and mudguard.
Disconnect the brake pipes from the calliper and
drain the brake fluid.
Then, remove the plastic and metallic straps.
Unscrew the brake pump pipes as indicated in the
figure.
Front brake pipes removal
Unscrew the braking splitter screw.
Disconnect the brake pipes removing the two met-
allic straps indicated in the figure.
Remove the brake oil tube fitting from the rigid pipe
inside the front suspension arm and loosen the
hydraulic joint fixing nut of the suspension locking
to release the brake pipes.
MP3 250 i.e. Braking system
BRAK SYS - 5