Datasheet

SW TICHINGTHESMARTWAY
MS-215-4
Remarks
When mounted onto ferromagnetic parts
switching distance of
may reduce.
Electromagnetical influences and magnetic
fields may change the switching behaviour of
the sensor.
MS-215-4
Only non-ferromagnetic screws to be used for
mounting.
MS-215-4
Form C Reed Sensor
Test coil 093TC-
Test programs
Test Procedure of final Reed Sensor Test Parameters
Material Information
AT range Test program
2 MS-215-4 2= -
3 MS-215-4 3= -
4 MS-215-4 4= -
Material
Colour
Housing ABS black
Cable UL 1061, AWG 24, 4 mm stripped and tinned COM: black, NO: red, NC: brown
Potting compound Epoxy black
Test Coil placed in vertical position
Reed Sensor aligns with bottom line
Reed Sensor centered in Test Coil
PIC Proximity Instrumentation Controls
Kontaktbauelemente GmbH
Phone [phone]
Fax [phone]
Rev.: 1.0
ms2154_ds_e_1.0
Page 2 of 2 Nibelungenstr. 5 A
90530 Wendelstein, Germany
[e-mail]
www.pic-gmbh.com