Instructions for use

V1.0
780 mm 720 mm 230g
Li-pol
3s 600-850
2206
80-120w
8/4 - 8/6
You may also need:
* sharp x-acto knife
* philips screwdriver
tweezers
* CA glue medium + thin, CA kicker
* drill 1mm
* ruler
* pencil (marker)
* fine handsaw (Dremmel)
*
* little pliers
1.
2.
3. 3.
Kit Contents:
* fuselage
* wings
* horizontal stabilizer
* accessory pack
* pushrods set
* vertical stabilizer
Accessory Pack Contents:
* carbon diam. 1.5x50mm ... 2x
* brass pin clevises ... 8x
* heatshrink tube ... 5x
* bowden end ... 2x
* plastic arm ... 1x
* plywood parts
Horns etc.:
1. elevator horns
2. rudder horns
3. ailerons horns

Summary of content (13 pages)