Instructions

15
•During installation, make sure that the bracket is securely anchored.
•Check the threaded joints regularly.
•Check the alignment of the laser module.
Mounting screws B1
Tensioning screw A2
Mounting screws B2
Shaft
ø 22mm
Step 3:
Now secure the laser with the two fas-
tening screws B1. Use a 4 mm Allen key.
Hand tightening is sufficient.
Step 4:
You can attach the laser to a 22 mm
shaft, or use our base plate. Proceed as
per steps 1 to 3. The entire bracket can
be tilted via the 22 mm shaft.
Mounting screw C1
Step 5:
You can rotate the entire laser bracket th-
rough 360°. To do so, use a 4 mm Allen
key to release the three fastening screws
C1. Make sure that the cable is not kinked
or stressed due to the rotation.