Datasheet

Carbon resistive element.
Dust proof enclosure.
Upon request:
FEATURES
MECHANICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
HOW TO ORDER
NOTES:
STANDARD OPTIONAL EXTRAS
T-16
16 mm Carbon
Potentiometer
–
–
–
High mechanical endurance.
–
Detents
Stereo matching
Switch
Nut & washer
–
Stop torque:
> 40 Ncm. ( > 56 in-oz)
–
Torque:
0.5 to 1.5 Ncm.
(0.7 to 2.1 in-oz)
–
Electrical rotation angle:
280° ± 20°
–
Mechanical rotation angle:
300° ± 5°
(See note 1)
S
Models
Metal shaft
S
D
T
Plastic shaft
X
W
Y
Z
T-16
Series
T-16
P01
P07
Metal
Plastic
(See note 3)
Bushings
– = No
N = Normal
U = With non
rotary pawl
N
(See note 9)
See note 8
(See note 7)
(See note 6)
(See note 5)
Others laws upon request
(See note 4)
H
Terminals
C= Solder Lugs
H= Horiz. PCB
V= Vert. PCB
L= Vert. in Line PCB
(2) Shafts: The codes indicate diameter and length. Shaft M05 only for double potentiometer.
(1) Terminals: Models D y T are not available with terminals "V" or "L" .
(7) Detents : - Not available for models with plastic shaft X, W, Y, Z.
- Detents and switch are not compatible.
(9)
(3) Bushings: – = Only for potentiometer model X, W.
U = Standard antirotation lugs (at 90° CW).
+15
-20
15 20
negative tolerance
(5)
Tolerance (non standard), upon request.
positive tolerance
Example code:
(6) Shafts length:
Only for special length and plain shafts (not knurled).
Example: Shaft Ø 6,25 L= 24.5
M07 ....... 24.5
Shafts length
shafts
Flatted and slotted shafts, etc. will need drawings.
Shaft M05 (T-16D) with other lengths, ask by drawing. NOTE: Max. length 40 mm. ( shafts 4, 6, 6.25)
In models "D" and "T" with different values, ask by drawing.
(8) Stereo matching: Only available in tandem models and upon request.
–
Residual resistance:
–
Equivalent Noise Resistance:
–
Operating temperature**:
–25°C + 70°C (–13°F + 158°F)
–
Tolerance (*):
± 20%
M03
Shafts
Value
10 1
Number of zeros
(4) Value:
* Others upon request
QS 9000
Certificate Nº 72037
ISO 14001
Certificate Nº 65663
(See note 10)
Switch: Not available for models X, W, Y, Z, T, D.
NOTE: The information contained here should be used for reference purposes only.
–
Range of values (*)
–
Max. Voltage:
250 VDC (lin) 125 VDC (no lin)
–
Nominal Power 50°C (122°F) (see power rating curve)
0.2 W (lin) 0.1 W (no lin)
± 30%
–
Taper (*) (Log. & Alog. only Rn > 1K)
Lin ; Log; Alog.
M03
M07
M11
M16
(See note 2)
Switch Terminals
I = PCB
C = Solder lugs
Nut & Washer
-TA = Loose nut & washer
MTA= Assembled nut
& washer
–T– = Loose nut
MT– = Assembled nut
Stereo matching
3D = 3dB
4D = 4dB
6D = 6dB
Detents
01P= 1 detent
11P= 11 detents
41P= 41 "
Shafts spec. length
XX.X
0
Tolerance
2020= +/-20%
3030= +/-30%
2020
Taper
A= linear
B= Log.
C= Alog.
A223
2 first digits of the value.
Code:
67
Switch option not available with antilog taper.
(10)
** Up to 85°C depending on application