Datasheet

(2) SHAFTS: The codes indicate diameter and length. M08: Code for the double potentiometer.
(1) MODELS : Models D y T are not available with "V" terminals.
(7) DETENTS : - Not available in models with plastic shaft X, W, Y, Z.
- Detents and switch are not compatible.
Two types of switches are offered: F1 and F2.
SWITCHES :
F1 = The code is "F01"
Plastic shafts are only available if they are code P10, P11 or P12
(9)
F2 = (Only with metal shaft) Indicate the corresponding I-21 switch code.
(3) BUSHINGS ; The codes types 11, 12 and 13 have an antirotation lug (at 90°CW). Plastic shaft and double model are only available with Ø6 bushing.
+7%
-5%
07 05
negative tolerance
(5)
Tolerance (special), upon request.
positive tolerance
Code :Example :
(6) Shafts special length:
Only for special length and plain shafts (not knurled).
Example: Shaft Ø6 L= 24.5
M06 ....... 24.5
special length
shafts
Flatted and slotted shafts, etc. will need drawing.
Shaft M08 (T-21D) with other length, order under special drawing number.
Recomendation : Shaft L > 60 ..... bushing C = 19
10 1
Number of zeros
(4) VALUE:
2 first digits of the value.
Code:
In models "D" and "T" with different values, order under special drawing number.
Carbon resistive element.
FEATURES
MECHANICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
HOW TO ORDER
STANDARD OPTIONAL EXTRAS
T-21
21mm Carbon
Potentiometer

(See note 1)
A
Models
Metal shaft
A
D
T
S
Plastic shaft
X
W
Y
Z
T-21
Series
T-21
P01
P12
Metal
Plastic
(See note 3)
Shaft ØA Bushing Ø B Length C
Bushings
Code
01
(See note 9)
(See note 7)
(See note 6)
(See note 5)
Other tapers
on request
(See note 4)
C
Terminals
C= Solder Lugs
H= Horiz. PCB
L= Horiz. in Line PCB
V= Vert. PCB
01
11
12
13
14
00
4
6 "U"
6 "U"
6.35 "U"
6.35
For models pot. X,W, S
M7 x 0.75
3/8" x 32 h.
3/8" x 32 h.
3/8" x 32 h.
M10 x 0.75
6
9
12
9
9
06
07
08
09
6
6
6
6
M10 x 0.75
M10 x 0.75
M10 x 0.75
M10 x 0.75
7
9
12
19

Residual resistance:

Equivalent Noise Resistance:

Operating temperature**:
25°C + 70°C (13°F + 158°F)

Tolerance (*):
± 20%
Value
* Others upon request
(See note 8)
(8) Stereo matching: Only available in tandem models and upon request.
NOTES:
M04
Shafts
(See note 10)
NOTE: The information contained here should be used for reference purposes only.

Range of values (*)

Max. Voltage:
250 VDC (lin) 150 VDC (no lin)

Nominal Power 50°C (122°F)
(see power rating curve)
0.25 W (lin) 0.12 W (no lin)
± 30%

Taper (*) (Log. & Alog. only Rn > 1K)
Lin ; Log; Alog.
M04
M06
M07
M08
M11
M16
(See note 2)
Switch
F01 = Mod. F1
212 = Mod. F2
" "
" "
744 = Mod. F2
Nut & washer
-TA = Loose nut & washer
MTA= Assembled nut &
washer
MT- = Assembled nut
-T- = Loose nut
Stereo matching
3D = 3dB
4D = 4dB
6D = 6dB
Detents
01P= 1 detent
11P= 11 detents
41P= 41 "
Shafts spec. length
XX.X
0
Tolerance
2020= +/-20%
3030= +/-30%
2020
Taper
A= linear
B= Log.
C= Alog.
A223
3

Stop torque:
> 80 Ncm. ( > 112 in-oz)

Torque:
0.5 to 1.5 Ncm.
(0.7 to 2.1 in-oz)

Electrical rotation angle:
290° ± 20°

Mechanical rotation angle:
310° ± 5°
95
Switch option not available with antilog taper.
(10)
Upon request:
Detents
Stereo matching
Switch
Nut & washer

High mechanical endurance.

** Up to 85°C depending on application
ISO TS 16949 / ISO 14001