Operation Manual

Chapter 6: Two-track editing with Studio Plus 127
The PIP effect interface
If you prefer to enter your PIP parameter settings
numerically rather than graphically, you can turn to an
alternative interface provided by the Video effects tool.
You can also combine the two methods, using the PIP
tool’s graphical interface to specify the initial settings,
then fine tuning them with the numerical effect
parameters.
The Picture-in-picture effect is found in the Overlay
Effects group. The available parameter settings are
almost identical to those offered by the PIP tool:
Parameter settings for the Picture-in-picture effect.
Position: The Horizontal and Vertical sliders set the
offset of the center of the PIP frame from the center of
the background frame.
Size: The Width and Height sliders set the size of the
PIP frame as a percentage of its original dimensions.
Cropping, if used, can further reduce the final size of
the PIP frame on the screen.
Cropping: The four sliders in this group trim away a
percentage of the original PIP video frame, allowing
you to remove unnecessary portions of the image and
focus on the main subject.