Operation Manual

Chapter 8: Still images 159
configured in the Capture Source options panel (page
248) and the Capture Format options panel (page 252).
The Frame grabber in grab-from-movie mode. When
you grab from an external source (e.g. a camcorder),
the Camcorder Controller is displayed. With DV
equipment, you can navigate the source tape from
within the tool.
Transport controls: If your source video is a DV
camcorder, MicroMV camcorder or VCR connected to
a 1394 port, Studio provides convenient on-screen
transport controls for locating the frame you wish to
grab. For a description of these controls see “The
Camcorder Controller” on page 20.
Reduce flicker: If the source video of the frame grab
contains a large amount of motion, the grabbed frame
may show flickering, which can be reduced or
eliminated by checking the Reduce flicker option.
Because Reduce flicker also reduces resolution
somewhat, you should not use the option if the overall
result is undesirable for a particular image.
Grab: Click the Grab button when you have located
the frame you want to grab in the Player and
configured the Reduce flicker option. The grabbed