Operation Manual

232 Pinnacle Studio 9
Connecting a TV set or video monitor
Many camcorders have an integrated display, making it
unnecessary to attach a video monitor.
Otherwise, to view your movie as it is recorded, a TV
set or a video monitor must be attached to the video
outputs of your recorder. Video outputs are not always
available on DV camcorders.
Output your movie to videotape
Switch to Make Movie mode, and check that your
camcorder or VCR is connected and ready to record
your movie.
To output your movie to videotape:
1. Click the Tape tab to bring up the controls shown
here:
2. Click the Create button.
3. If you have used preview-quality clips, Studio
displays a dialog box prompting you to insert the
original DV tape(s) into your DV playback device
so that clips can be recaptured at full quality.