Operation Manual

248 Pinnacle Studio 9
Option settings in Studio apply to both the current and
future Studio sessions. There is no master reset. If you
want to return to the factory preset values, use the
information in the following sections, which deal with
all ten options panels in turn.
Capture source settings
This panel is divided into three areas: Capture devices,
Scene detection during video capture and Data rate.
The changes you make affect all future captures. If you
want to configure only one capture session, make sure
you restore the old values before the next session.
Capture devices
Studio senses which capture hardware you have
installed on your system for both video and audio. If
you have more than one available capture device in
either category, choose the one you want to use for the
current capture session.
Video: The devices listed here may include both digital
(DV, MicroMV) equipment connected via an IEEE-
1394 cable and various types of analog video source
(Studio DC10plus, TV tuner card, USB-connected