Operation Manual

302 Pinnacle Studio 9
HollywoodFX transitions are still
watermarked after upgrading
Answer ID 1804
When upgrading to PRO, make sure you have
completed the installation and obtained a keycode. The
installer will prompt you to insert a keycode.
To get a keycode, go to www.hollywoodfx.com and log
into your account. In the lobby, click on Register a
Product.
If you have already registered PRO, you can simply
click on Get New Keycode.
“Cannot initialize the DV capture device”
error appears in Capture mode
Answer ID 2716
The error message reads in full: “Pinnacle Studio
cannot initialize the DV capture device. Please ensure
that the camcorder is connected and the power is on.”
This error message occurs only when you are capturing
from a digital source (DV, MMV or Digital8
camcorder) plugged into the DV port (also called a
“FireWire” or “1394” port).
If you are capturing from an analog source:
• You need to correct your capture source setting. In
the Capture devices box on the Capture source
options dialog, notice that Video and Audio are set to
“DV Camcorder – Pinnacle 1394”, the default