Operation Manual

Appendix C: Troubleshooting 307
control other devices in your system: if a device no
longer works you can get it to work again by rebooting
your system.
To keep applications from loading when your PC is
started (or rebooted), use the following steps.
1. Click on Start ¾ Run
2. In the Open box, type: msconfig
3. Click OK.
In the System Configuration Utility window, click on
the far right tab called Startup. Remove all checks from
the boxes except for System Tray (SysTray.exe).
Windows 2000 and XP
Use the End Process button in the Windows Task
Manager, or employ one of the software utilities
available for Windows 2000 and XP that can assist
with this procedure.
Hardware not found during installation.
Possible cause: The PCI slot in which the hardware is
installed was not assigned an IRQ in the BIOS or it
may be sharing an IRQ with another device. It may also
be that the card is not seated completely into the PCI
slot.
Solution: Try reseating the card in its original slot or in
a different one. In most cases, you may be able to get a
different IRQ assignment by simply shutting off the
computer and installing the DV card or other hardware
in another slot.