Operation Manual

Appendix C: Troubleshooting 309
4. After ScanDisk is done, click on Start ¾ Programs
¾ Accessories ¾ System Tools ¾ Disk
Defragmenter (this may take a while).
5. Turn off energy-saving features (right-click on your
Desktop and select Properties ¾ Screensaver
(under Energy… Settings). Make sure everything
under Settings for… power schemes is set to Never.
6. Go to Start ¾ Settings ¾ Control Panel ¾ System.
Click on the Performance tab, then File System,
then the Troubleshooting tab.
7. Click to the left of the Disable write-behind
caching for all drives option to select it and click
OK.
8. Under the hard-disk tab, set the Read-ahead
optimization option to None.
In general, this will result in an increase in the data
transfer rate. Caution: In some hard drives, it can
result in a decrease in the write rate!
Note: Video-editing programs do not multitask very
well. Do not use any other program while making
movie (videotape or CD) or capturing. You can
multitask while editing.
There is no video in the Player preview.
Solution 1: Change video resolution and/or color depth
on the Display Properties dialog:
1. Right-click your Desktop and select Properties,
then click the Settings tab on the dialog.
2. Under Colors, try each of 16-bit, 24-bit and 32-bit.
3. Under Screen resolution, again try each available
setting from 800x600 upwards.