Operation Manual

Chapter 2: Capturing video 25
drive (unless you have unchecked Capture preview
on the Capture source options panel).
During capture, Studio performs automatic scene
detection based on the current setting in the
Capture source options panel.
8. Click the Stop capture button to end capture at a
point you select.
Studio automatically stops capturing if your hard
drive fills up or the maximum duration you entered
is reached.
Scene detection
Automatic scene detection is a key feature of Studio.
As video capture proceeds, Studio detects natural
breaks in the video and divides it up into scenes. A new
icon is created in the Video Scenes section of the
Album for each scene detected.
Depending on which capture device you are using,
automatic scene detection is carried out either in real
time during capture, or as a separate step immediately
after capture is completed.
You can configure scene detection using the options
under Scene detection during video capture on the
Capture source options panel (Setup ¾ Capture
Source). Not all scene detection options are available
with every type of video source. Options that do not
apply to your setup are disabled in the dialog.
The four possible options are:
• Automatic based on shooting time and date: This
option is available only when you are capturing from