Operation Manual

28
AUX
4821
Full
6/10
2
1
1 Clock display
Displays the time and date setting screen
 Setting the time and date on page 28
2 Screen display mode key
Changes the wide screen mode
 Changing the wide screen mode on page 28
Setting the time and date
1 Touch the current time on the screen.
2 Touch
or to set the correct time and
date.
You can operate the following items: Year, month, date, hour,
minute.
p You can change the time display format to “12hour” (default)
or “24hour”.
p You can change the order of date display format: Day-month-
year, Month-day-year.
Changing the wide screen
mode
You can set the screen size for the video and JPEG/BMP images.
p The default setting is “Full”, and for JPEG/BMP images is
“Normal”.
p When there are touch panel keys on the screen, images are
displayed with the “Full” mode regardless of your setting.
1 Touch the following key.
p The appearance of this key changes according to the current
setting.
2 Touch the desired mode.
 Full:
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
 Zoom:
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.
 Normal:
A 4:3 picture is displayed normally, without changing its
proportion.
p You cannot operate this function while driving.
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in “Zoom”
mode.
Resetting various settings/
Restoring this product to the
default settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p The settings configured on the “Theme” screen are not
reset.
Method 2: Initialise from the “System” menu
Method 3: Press the RESET button
 Resetting the microprocessor on page 4
Restoring the default settings
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “System” setting screen.
2 Touch [Restore Settings].
A message confirming whether to initialise the settings appears.
3 Touch [Restore].
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
Common operationsOther functions
< QRB3656-A >
Common operations Other functions