Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Clock Set
- Demo Mode
- Calibrate Touch Panel
- Parking Brake Interlock
- Table of Contents
- Parts & Controls
- Operation
- Parts & Controls
- Basic Operations
- Tuner
- Playing Video
- Playing Audio
- Pandora
- Playing Still Images
- Bluetooth Telephone
- XM / SIRIUS
- HD Radio
- Bluetooth Wireless
- Advanced Operations
- Storing and Recalling Stations
- Storing the Strongest Stations
- Tuning in to Strong Signals
- Tuning in to Strong HD Radio Signals
- Using iTunes Tagging
- Switching the Media File Type
- Operating the DVD Menu
- Operating this Unit’s iPod Function from your iPod
- Random Play
- Repeat Play
- Playing Videos from your iPod
- Browsing for a Video / Music on the iPod
- Resume Playback
- Frame-by-Frame Playback
- Slow Motion Playback
- Searching for the Part you want to Play
- Changing Audio Language During Playback
- Changing the Subtitle Language During Playback
- Changing the Viewing Angle During Playback
- Return to the Specified Scene
- Selecting Audio Output
- PBC Playback
- Selecting Tracks from the Track Title List
- Selecting Files from the File Name List
- Using Advanced Sound Retriever
- Changing Audiobook Speed
- Displaying Lists Related to the Currently Playing Song
- Playing DivX VOD Content
- Capture an Image in JPEG Files
- Changing the Wide Screen Mode
- Selecting and Playing the Quick Mix / Station List
- Storing Song Information
- Switching the XM / SIRIUS Channel Selection Mode
- Selecting an XM / SIRIUS Channel Directly
- Using the MyMix Function
- Using the Game Alert Function
- Displaying the Radio ID
- Switching the SIRIUS Display
- Using the Instant Replay Function
- Switching the Seek Mode
- Switching the Reception Mode
- Using the Missed, Received and Dialed Call Lists on the Optional Bluetooth Adapter
- Setting Automatic Answering
- Switching the Ring Tone
- Using a Cellular Phone to Initiate a Connection
- Registering a Connected Cellular Phone
- Voice Recognition
- Connecting a Bluetooth Audio Player
- Connecting to a Bluetooth Device Automatically
- Displaying Bluetooth Device Address
- Menu Operations
- Adjusting the Picture
- Setting Rear Monitor Output
- Touch Panel Calibration
- Using an AUX Source
- Using an External Unit
- Installation
- Troubleshooting
- Error Messages
- Specs
- Warranty
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto TA
or auto EQ while driving.
CAUTION
! Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
— The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
— A speaker is connected to a power amp de-
livering output higher than the speaker’s
maximum input power capability.
! If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in battery drainage. Be sure to place
the microphone in the specified location.
Before operating the auto EQ function
! Carry out auto EQ in as quiet a place as
possible, with the car engine and air condi-
tioning switched off. Also cut power to car
phones or portable telephones in the car, or
remove them from the car before carrying
out auto EQ. Sounds other than the mea-
surement tone (surrounding sounds, en-
gine sound, telephones ringing etc.) may
prevent correct measurement of the car in-
terior acoustic characteristics.
! Be sure to carry out auto EQ using the op-
tional microphone. Using another micro-
phone may prevent measurement, or result
in incorrect measurement of the car inter-
ior acoustic characteristics.
! In order to perform auto EQ, the front
speaker must be connected.
! When this unit is connected to a power
amp with input level control, auto EQ may
not be possible if the power amp’s input
level is set below the standard level.
! When this unit is connected to a power
amp with an LPF, turn this LPF off before
performing auto EQ. Also set the cut-off fre-
quency for the built-in LPF of an active sub-
woofer to the highest frequency.
! The distance has been calculated by com-
puter to be the optimum delay to give accu-
rate results for the circumstances, so
please continue to use this value.
— The reflected sound within the car is
strong and delays occur.
— The LPF on active subwoofers or exter-
nal amps delay the lower sounds.
! Auto EQ changes the audio settings as fol-
lows:
— The fader/balance settings return to the
center position. (Refer to Using fader/
balance adjustment on page 57.)
— The equalizer curve switches to Flat.
(Refer to Recalling equalizer curves on
page 57.)
— The front, center and rear speakers will
automatically be adjusted to a high
pass filter setting.
! Previous settings for auto EQ will be over-
written.
Performing auto EQ
1 Stop the car in a place that is quiet,
close all the doors, windows and sun roof,
and then tur n the engine off.
If the engine is left running, engine noise may
prevent correct auto EQ.
2 Fix the optional microphone in the cen-
ter of the headrest of the driver’s seat, fa-
cing forward.
The auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat to
carry out auto EQ.
<QRB3126-A/N>67
En
67
Section
15
Menu operations
Menu operations