Installation Manual

4
Connecting the units
Connecting the power cord










This product
Microphone (supplied)
(AVH-P5200BT only)
4 m
(13 ft. 1 in.)
Fuse (10 A)
RGB input
IP-BUS input
(Blue)
Yellow
Connect to the constant 12 V supply terminal.
Fuse resistor
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Left Right
Front speaker Front speaker
R
ear speaker or
Subwoofer (4 Ω)
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
Violet
Violet/black
Not used.
Green
Green/black
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not
connect anything to Green and Green/black leads.
Subwoofer (4 Ω)
× 2
Rear speaker or
Subwoofer (4 Ω)
Orange/white
Connect to lighting switch terminal.
Fuse resistor
Wired remote input (WIRED REMOTE INPUT
)
Hard-wired remote control adaptor can be
connected (sold separately).
Microphone input Jack (MIC)
(AVH-5200BT only)
17 cm (6-3/4 in.)
17 cm (6-3/4 in.)