Operation Manual

Switching the auxiliary setting
Activate this setting when using an auxiliary
device connected to this unit.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch AV Input on the system menu to
turn AV Input on or off.
Setting the RGB Input
Settings are required according to the con-
nected device.
RGB Input can be set when all of the following
conditions are met.
— The iPhone is not connected to RGB input.
— No Bluetooth connection.
— The source is turned off.
1 Turn the source off.
Refer to Source off key on page 10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.
4 Touch RGB Input on the system menu
to select the RGB input.
5 Touch the desired setting.
! iPhone (CD-IU201S) – iPod with 30-pin con-
nector
! iPhone (VGA adapter) – iPod with light-
ning connector
(AVH-X5500BT/AVH-X3500DAB/AVH-
X2500BT)
! NAVI – Navigation system
Setting the App sound mixing
Refer to Setting the App sound mixing on page
36.
Setting MIXTRAX mode
Refer to Setting MIXTRAX mode on page 44.
Changing the picture
adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), and Temperature (tem-
perature) for each source and rear view cam-
era.
! You cannot adjust Color, Hue and
Contrast for the audio source.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
En
60
Section
18
System settings