GPS Receiver User Manual

Connecting the System

ENG/MASTER 96

Connecting the power cord (2)

This product

Yellow

To the terminal always supplied with power regardless of

ignition switch position.

Fuse holder (7.5 A)

Red

To the electric terminal controlled by the ignition switch

(12 V DC) ON/OFF.

Do not connect this lead to power source terminals to

which power is continuously supplied. If the lead is

connected to such terminals, the battery may be drained.

Orange/white

To lighting switch terminal.

Black

To car (metal) body. To keep electromagnetic noise from

the car body out of the navigation system, attach this lead

near the main unit.

Fuse resistor

Yellow/black, Purple/white, Pink, Lightgreen

Note: When replacing the fuse, be

sure to use only a fuse of the rating

prescribed on the fuse holder.

Power cord

See

pages 11-12.

Note: The yellow, red, and orange/white leads should

be connected to the opposite side of the fusebox

terminals from the battery.

☞

Note:

Cords for this product and those for other products

may be different colors even if they have the same

function. When connecting this product to another

product, refer to the supplied Installation manuals

of both products and connect cords that have the

same function.

CRD3650A_inst_001_030_Eng 4/15/02 2:17 PM Page 14