GPS Receiver User Manual

Installation

Parts supplied

When installing the antenna inside the car (on the dashboard or rear shelf)

Affix the metal sheet on as level a surface as possible where the GPS antenna faces outside

the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened

with its magnet.)

Note:

• When attaching the metal sheet, do not cut it into small pieces.

• Some models use window glass that does not allow signals from GPS satellites to pass through. On

such models, install the GPS antenna on the outside of the car.

GPS antenna

Make sure the surface is

free of moisture, dust,

grime, oil, etc., before

affixing the metal sheet.

Note: The metal sheet

contains a strong adhesive

and may leave a mark on

the dashboard if it is

removed.

Clamps

Use clamps to secure the

lead where necessary inside

the car.

Metal Sheet

Peel off the protective sheet

on the rear.

Waterproof padClamp (5 pcs.)Metal sheetGPS antenna

ENG/MASTER 96

CRD3650A_inst_001_030_Eng 4/15/02 2:17 PM Page 24