Pioneer English AVIC-W8400NEX AVIC-W6400NEX MULTIMEDIA NAVIGATION RECEIVER H?) Radio• This HDRadiorecelver enables: Pso) HD2/HD3) Digital Sound) Artist Experience) {()} pandora® Operation Manual Notice to all users: This software requires that the product is properly connected to your vehicle’ s parking brake and depending on your vehicle, additional installation may be required.
Contents I_ ~ Important The screen shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. Storing a location in [Saved Location] ............... Storing a route in [Saved Routes] ........................ Receiving real-time traffic information (TMC)....................................................................... Checking useful information about your trip...................................................................
■ HDMI .............................. 122 Basic operation ........................................................... 84 ■ Compressed files............. 88 Starting procedure.................................................. 122 Basic operation ......................................................... 122 Inserting and ejecting media................................. 88 Starting procedure .................................................... 90 Basic operation .............................................
Handling large errors............................................. 171 Route setting information.................................... 175 Handling and care of discs................................... 176 Playable discs............................................................ 177 Detailed information for playable media ....... 177 Bluetooth ................................................................... 182 SiriusXM® Satellite Radio ...................................... 182 Wi-Fi .....................
Precaution - Notes on internal memory English • If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. • The information will be erased by disconnecting the yellow lead from the battery (or removing the battery itself ). • Some of the settings and recorded contents will not be reset. About this manual This manual uses diagrams of actual screens to describe operations.
Parts and controls Main unit English W8400NEX - W6400NEX -6-
LCD screen VOL (+/-) © .. ® E!. ® ® @) @ @ .. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 135). Press to display the top menu screen. Press and hold to power off. To power back on, press any button. Press to display the menu bar (page 15). Press and hold to mute or unmute. Press to display the top menu screen or back to previous screen. Press and hold to turn off the display.
SRC © ® TOP MENU Source mode select switch Thumb pad MUTE MENU AUDIO SUBTITLE ANGLE BAND/ESC ® (J) ® ® @) (jj) @ --RETURN ► / II or or ■ @) FOLDER/P.CH Press to cycle through all the available sources. Press and hold to turn the source off. Press to return to the top menu during DVD playback. Use to switch the source mode between the front source and the rear source. Use to select a menu on the DVD menu. Displays the DVD menu during DVD playback.
IRemoving the detachable faceplate 1 2 Press the I button. - Gently grip the bottom of the detachable faceplate and slowly pull it outward. English G) Detachable faceplate IAttaching the detachable faceplate 1 2 Slide the detachable faceplate all the way into this product. Push the lower part of the detachable faceplate until you hear a click.
IBasic operation Notes on using the LCD panel WARNING • Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. • Do not use with the LCD panel left open. It may result in injury in the event of an accident. • Close the LCD panel before putting the vehicle in motion. Driving with the LCD panel open may damage the unit, and any backup camera image shown through the LCD panel will not be visible.
2 Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Preparing the remote control How to replace the battery ~CI)~ e-· 0- SCIJ SIEE!lB CDEJEJEJ ~a83a Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. A WARNING • Do not ingest the battery, Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery.
1=================1 - Using the remote control Point the remote control in the direction of the front panel to operate. NOTE The remote control may not function properly in direct sunlight. Starting up the unit 1 2 3 4 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTES • From the second time on, the screen shown will differ depending on the previous conditions.
- NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 160). ISwitching the speaker mode I Starting up the navigation system When you use the navigation function for the first time, an initial setup process starts automatically. Follow the steps below. TIP You can change the language later using [Regional] in the [Settings] screen.
9 Touch [Finish]. -~~==================== Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. English NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys I : Returns to the previous screen. -=-=----=----_-_-_------1 [Kl : Close the screen.
- IOperating _ _the_time bar I English - You can change the playback point by dragging the key. The playback time corresponding to the position of the key is displayed while dragging the key. Operating the menu bar 1 Press . The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source. X Q abcdefgh • I◄◄ ► / II ►► I Switches the dimmer duration by day or night. NOTE When AppRadio Mode + is on, AppRadio Mode + SideControlBar is displayed.
- The hidden function keys appear. NOTE This key does not appear for some AV sources. I_ _ __keyboard Operating the on-screen ____ 1_ English G) Displays the characters that are entered. ® ® © Moves the cursor to the right or left for a number of characters equivalent to the number of touches. ® Confirms the entry and proceeds to the next step. ® Enters a space. (J) Switches between alphabet and numbers/symbols. ® Switches between capital and lower case letters.
Top menu screen English Favorite source icons TIPS • When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display. • If you select [Power OFF], you can turn off almost all functions. The [Power OFF] mode is released in the following cases. – An incoming call is received (only for hands-free phoning via Bluetooth). – A rear view camera image is input when the vehicle is in reverse. – A button on this unit is pressed.
[]] Connected device key Displays connected device. Switches the source or application with connected devices such as AppRadio Mode +, external navigation system, Apple CarPlay, Android Auto. 1 Touch and hold []]. @ appears at the top right of the favorite application key. 2 Drag @ to the desired position. To finish the adjusting, touch any place of the display except for the favorite application key. • You can also switch the mobile device to be connected with the following steps. 1 Touch . 2 Touch .
INavigation - Menu screen view and operations Press English 1 2 . Touch . The main menu screen appears. Main screen H D Main Menu ., / __ ·-· •, ~ r~~",'. 0 f'lorrn1:1 / / / ~ ' "' I ,: 20 ~ D Iii ~ fj G) Returns to the map screen. ® Notifications that contain important information. ® Displays the previous or next page of the navigation menu. © The locations that you saved as favorites. ® Switches between 2D, 3D, and 2D North up view modes.
Navigation items [TI Searches for a destination using various methods (page 26). I:~ I Builds your route or edits the route currently set (page 34). 1~~ 1 Displays the traffic screen (page 43). 00 Displays useful information to support your driving (page 46). [QJ Configures the navigation-related settings (page 51). 00 Displays information about your navigation system (e.g. the version information or license).
read the map screen IHow -to--- ----=1 English - - NOTE Depending on the conditions and settings, some items may not be displayed. G) * Shows the number and name of the street to be used (or next guidance point). * Shows the next guidance point (maneuver). The type of the event (turn, traffic circle, exiting freeway, etc.) is displayed (page 24). * Shows the distance to the next guidance point (maneuver). ©* ® Shows the maneuver after the next maneuver.
English CD Touch to display the AV source list. ® Shows the current status of AV source briefly. ~ Touch to display the phone menu screen (page 64). I I Changing the scale or the map manually I By default, even if the map scale is changed on the scrolled map, it will return to the preset scale (according to the setting in [Viewpoint] of the [Navigation Map] settings) when the current position map is displayed. To change the scale of the current position map, perform the following procedure.
a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you. • When the route is not set: "Smart Zoom" will zoom in if you drive slowly and zoom out when you drive at high speed. 1=-=-=-=-====--=--=--=--=_ 1- English Switching between 2D, 3D, and 2D North up views You can switch how the map is displayed. For 2D map view mode, you can select between “Heading up” and “North up”.
3 Touch [E]. The map returns to the current position. TIP If you press , the map returns to the current position. ▶Control keys on the scrolled map --------------- English Map screen (scrolled map) Changes the map view mode. The current map mode is shown on the control key. Zooms in or out on the map. You can also zoom out or in by pinching or expanding the map. Rotates the map clockwise or counterclockwise. rn Cancels map rotation. Tilts the map angle up or down.
Enter traffic circle (maneuver after the next maneuver). Freeway entrance or freeway exit. Board ferry or leave ferry. - Lane information When navigating on multilane roads, you will need to make sure to take the proper lane for the recommended route. t;- L.!Ja!!J[J ~------' N Los Angeles St + + I / 'tV, / Signposts Signs are displayed at the top of the map. Junction view If you are approaching a complex intersection, the map is replaced with a 3D view of the junction.
• When the route is set: Distance to final destination, time needed to reach the final destination and estimated arrival time are shown. English - • When the route is not set: Direction or altitude is shown. - NOTES • Touching and holding the field allows you to display the setting screen for the field. For details, refer to page 57. • The estimated time of arrival is an ideal value calculated based on the speed limit value set in [Max. Speed] of vehicle type setting and the actual driving speed.
- NOTE Some information regarding traffic regulations depends on the time when the route calculation is performed. Thus, the information may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question. Also, the information on the traffic regulations provided applies for a passenger vehicle, and not for a truck or other delivery vehicles. Always follow the actual traffic regulations when driving. Press Touch . . Touch [New Route].
1_ _ _ _ _ _ _ _ _1 Searching for a_ location by address Search a destination in which the address is specified. TIP Depending on the search results, some steps may be skipped. 3 4 5 6 Touch [Address]. Select the [Country]. Proposes the country where you are as a default. If you want to change the search area, set another country. Select the [City or ZIP code]. Proposes the city/town where you are as a default. You can select the city/town using its postal code instead of its name. Select the [Street].
TIP If you touch , you can sort the results or show the locations of all facilities on the map. Touch [Select as Destination]. NOTES • When a route is not set, POIs are searched for around the current position. • When the current position is not available either (no GPS signal), POIs are searched for around the last known position. • When a route is set, [Gas Station] and [Restaurant] are searched for along the route, and [Accommodation] and [Parking] are searched for around the destination.
TIP Use the keyboard to enter the name of the place if you touch [Search by Name]. 5 Touch the POI. The searched location appears on the map screen. TIP If you touch 6 , you can change the sort method of the results. Touch [Select as Destination]. -=---======= ISelecting a destination from stored locations Storing locations you visit frequently saves time and effort. Selecting an item from the list provides an easy way to specify the position.
3 4 Touch [Show Route]. Touch [Start Navigation]. TIP You can change the final destination or add waypoints in [Route Planner] (page 34). Selecting a destination from history The places that were previously set as destinations or waypoints have been automatically stored in [History]. 1 Touch [History]. 2 3 English i======================iTouch the entry. The searched location appears on the map screen. Touch [Select as Destination].
2 Enter the latitude value and touch [OK]. TIP When entering the coordinates in UTM format, touch 3 - -1=-=====--- English 4 , then [UTM Coordinates]. Enter the longitude value and touch [GO!]. The searched location appears on the map screen. Touch [Select as Destination]. TIP You can change the display format of the latitude and longitude to any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
English G) Zoom in/zoom out TIP You can also pinch or expand the map to zoom in or out. ® Cancels the [Map Location] screen and displays the map of the current position. ® Returns the cursor to the initial position and the map scale to the initial scale. © Shows the route setting preferences for route calculation. Touch the keys to activate or deactivate the preference. l!:lil : Calculates the route prioritizing the use of freeways when the key is activated.
Starting the navigation 1 Touch [Start Navigation]. Your navigation system starts the route guidance. TIP See page 24 for details on the route summary screen. Checking and modifying the current route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those options. Building a route using_ [Route _ Planner] I_ _ _ _____I The [Route Planner] (or [My Route]) feature lets you build your route using the list of destinations.
G) Starting position (The current vehicle position is set as default and [Current GPS Position] is displayed.) (page 35) Calculates the route and shows the [Route Summary] screen. ® Displays the shortcuts. [Delete All]: Deletes all waypoints and the destination. Touch [Continue Without Route] to cancel the planned route. [Optimize Waypoints]: Changes the order of waypoints automatically so that the route can be easily traveled.
The system starts route recalculation after [Show Route] is touched, and then the [Route Summary] screen appears. After [Start Navigation] is touched, your navigation system starts the route guidance. - NOTE After [Continue Without Route] is touched, the current position map appears. 1 2 3 4 Press then touch English ▶Changing the starting position . Touch [Route Planner] or [My Route]. Touch [Current GPS Position]. Touch [Back to GPS Position] and then touch [Delete Start Point].
English TIP If more than three route alternatives have been found, [More Results] appears. Touch [More Results] to show the other routes. 5 Touch [Select]. The selected route is applied as your current route. For more information about route calculation conditions, refer to [Route Planning Method] (page 53). 1_____________ 1 Checking detour routes You can check for detour routes that avoid the selected sections or streets, or that avoid the road ahead. You can also check for alternative routes.
---=---=---=--=---=-===-_ __ Menu Item Description [Restore Original Route] Cancels the route with avoidances and restores the previous route. IChecking route information and preferences Once you set the route, you can check a summary of the current route. 1 Press then touch . 2 3 Touch [Route Summary]. Touch one of the options. The condition of the displayed route is shown in the upper left by an icon. The total length of the route and approximate required time for the route are in the lower left.
® Canceling the current I_ _ _ route _guidance ______I If you no longer need to travel to your destination, follow the steps below to cancel the route guidance. 1 Press then touch . 2 3 Touch [Cancel Route] or [Delete Waypoint]. Touch one of the options. If there are no waypoints on the route, touch [Cancel Route] to cancel the route. If there are waypoints on the route, touch [Cancel Route] to cancel the route. Touch [Delete Waypoint] to delete only the nearest waypoint.
Storing a location in [Saved Location] Storing your favorite locations in [Saved Location] allows you to save the time and effort used on re-entering this information. [Saved Location] can include your home location, workplace, and places you have already registered. You can store one home location and one workplace location. 1 Press then touch . 2 3 4 5 Touch [New Route], and then [Saved Location].
I Renaming stored locations 1 2 3 - Touch [New Route], and then [Saved Location]. Touch ~, and then touch [Edit]. The [Select Location to Edit] screen appears. Touch the item you want to rename and touch [Rename]. English 4 5 6 I Press LA then touch ~. Enter the name and then touch ~ . - Touch [Done]. NOTE [Home] and [Work] cannot be renamed. The location can be set again. I Deleting stored locations 1 2 3 4 Press I LA then touch ~. Touch [New Route], and then [Saved Location].
NOTE To use this function, activate the warnings beforehand and set the alert types (page 55). 1 2 . Scroll the map and select a location. The cursor appears at the selected point. Touch . Touch [Add Alert Points]. Set the necessary parameters. Menu Item Description [Alert Type] Set the type of the alert point. [Speed Limit] Set the speed limit for this alert point (if applicable). [Direction] Set the direction from which you expect the alert to come from. 6 Touch [Save].
3 4 5 Touch [Route Summary], and then touch . Touch [Save Route]. Enter the name if needed and then touch . 2 3 4 5 6 7 Touch [New Route], and then . Touch [Saved Routes]. Touch , and then touch [Edit]. Touch the item you want to rename and touch [Rename]. Enter the name and then touch . Touch [Done]. Deleting stored routes I I1=--c._----==-§--=--=--=--=--=--=--=--=--=--=--=--=--=-= ]. Press then touch 2 3 4 5 Touch [New Route], and then Touch - , and then touch [Edit].
I Displaying the [Traffic Summary] screen 1 2 I Press LA then touch ~. Touch [Traffic]. The [Traffic Summary] screen appears. I Traffic information is displayed onscreen in a list. This allows you to check how many traffic incidents have occurred, the locations, and the distance from your current position. 1 Press LA then touch ~. 2 3 Touch [Traffic]. The [Traffic Summary] screen appears. Touch [Traffic Events]. A list with traffic information that has been received is shown.
3 Touch [Traffic Map]. English Road segments affected by traffic incidents are displayed in an alternate color on the map, and small symbols above the road show the nature of the incident. The traffic congestion lines indicate the degree of the congestion by color. 1-=-=-=-=-=- I Traffic notification icon The notification icon shows the status of traffic information reception. Touch the relevant traffic event icon on the map.
You can check the details of the traffic incidents. Touch the relevant event to display the location on the map. 1=================1 Turning the traffic information on or off NOTE If you turn the traffic information feature off, [Traffic] on the navigation menu disappears. 1 2 3 4 Press then touch . Touch , and then touch [Settings]. Touch , and then touch [Traffic]. Touch [Traffic] to turn the switch on or off.
Menu Item Description [Trip Monitor] Check the statistical data of your trips (for example, start time, end time, average speed, etc.) (page 47). [GPS Information] Displays the GPS information screen with satellite position and signal strength information. ----------------- Estimates the fuel cost to your destination by entering the fuel consumption information in the navigation system.
TIP To display the trip log on the map, touch [Visible on Map] to tick the check box. Touching you to view the shortcuts and enables you to use the following functions. allows Description [View on Map] Shows the trip log on the map screen. [Export Track Log] Exports the track log currently selected to an external storage device. ▶Setting the trip logger 1 2 3 4 5 6 Record the trip log. Press then touch . Touch [Useful Information]. Touch [Trip Monitor].
Menu Item Description [Change Color] Changes the color by selecting another color from the color table. TIP If you touch and then touch [Delete All], all entries can be deleted. Touch [Done]. - 1_____________ 1 Using the Trip Computer mode In the trip computer screen, the information received from the GPS receiver and your vehicle is displayed like a meter for a vehicle. 1 Press . 2 Touch the data field key. TIPS • If you touch [Trip Summary], the details of the current trip are displayed.
▶Setting the initial odometer value Before you use the fuel consumption feature, enter the initial odometer value from which you want to start measuring the mileage. 1 Press then touch . Touch [Useful Information]. Touch [Fuel Consumption]. Touch [Initial Odometer Value]. Enter the initial odometer value and then touch The initial odometer value has been set. .
7 8 Enter the name, date, and mileage for the reminder. Touch [Done]. TIP To delete an entry, touch to display the shortcut for deletion. You can configure the navigation settings, and modify the behavior of this system. 1 2 3 Press then touch . Touch , and then touch [Settings]. The [Settings] screen appears. Touch one of the following categories, then select the options.
Menu Item [Vehicle] - Description Set the type of vehicle you will be using on the route. NOTES • The route is planned based on the selected vehicle type. • To enhance the route accuracy, correctly select a vehicle type that is similar to the condition of your vehicle. [Car] • Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed.
Menu Item Description [Route Planning Method] Set to change the route planning method. Route calculation can be optimized for different situations and vehicle types by changing the planning method. Calculates a route with the shortest travel time to your destination as a priority. Usually the best selection for fast and standard cars. [Easy] Result in a route with fewer turns and no difficult maneuvers.
Menu Item Description [Ferries] Set to off to avoid prioritizing ferries for calculating the route. [Car Shuttle Trains]* Set to off to avoid prioritizing car shuttle trains for calculating the route. - - - - - - - - - - - - - - Set to off to avoid prioritizing carpool and HOV lanes for calculating the route. [Unpaved Roads] Set to off to avoid prioritizing unpaved roads for calculating the route.
Menu Item Description Given once relatively far from the next maneuver, it is repeated as the vehicle approaches the next maneuver, and it is repeated again right before the actual maneuver. [Announce Route Summary]* Select whether to have the navigation system announce by voice a quick summary of the route whenever a route is calculated. [Announce Traffic Info]* Select whether to have the navigation system announce by voice the traffic information whenever a traffic incident on your route is received.
Menu Item Description [Alert Point Warnings] Set to on to enable to adjust a variety of alert warnings. [Alert Types] Set the type of alert point. [Speed Camera Types] Set the type of speed camera. [Warning Road Signs] ▶Setting the alert point warnings You can set an alert for the different alert point categories, individually. Important The warning for road safety cameras (like speed cameras) is disabled when you are in certain countries where warnings for road safety cameras are prohibited.
1_ _Map] _ _ _ _ _ _ _ _1 [Navigation Fine-tunes the appearance of the map screen and adjusts how the software helps you navigate with different kinds of route-related information on the map screen. Menu Item Description [Map Display] See the effect when you change a setting.
Description [Services Displayed] Select the service types displayed for the freeway exits or service stations. Choose from the POI categories. [Automatic Overview] When selected, the map zooms out to show an overview of the surrounding area if the next route event (maneuver) is far. When you get close to the event, the map returns to the normal map view.
Description [Offer Hints Upon Detour] If you leave the recommended route and suddenly exit the freeway, this navigation system offers different alternatives near the exit like gas stations or restaurants. Also, if there are avoidable parts of the original route ahead (like a tunnel, a toll road or a ferry), you will find them in the list in case you want to bypass them with the help of this navigation system.
Menu Item Description The time zone setting changes automatically if automatic change is available. Otherwise, the present setting value that you set is used. [Manual Time Zone in Current Zone] The present setting value that you set is used in the current time zone. If your vehicle moves to another time zone, the time zone setting changes automatically. [Daylight Saving Time] Set daylight saving time as applying or not unless [Automatic Time Zone] is set.
Menu Item [Color And Icon] Description Icons for the relevant traffic incidents and lines indicating the traffic flow are shown on the map. Select whether to receive information on smooth traffic flow. [Offer Detour if it Saves at Least:] Set the minimum time to be saved when having the system suggest a detour route. If the estimated time saved by the planned detour avoiding the traffic incidents is more than the set time, the system suggests the new detour route.
Updating the map - 62 - English You can update existing content, purchase additional maps and activate extra services on your product. To update the content, download the update on your USB memory storage by using the computer to which the Naviextras Toolbox is installed. Then, transfer the data from connected USB memory storage to your navigation system by using [SyncTool] on this product. For details, access the following URL and refer to “HOW TO UPDATE?” GUIDE. http://pioneer.naviextras.
IBluetooth Bluetooth connection 4 5 6 Turn on the Bluetooth function on the device. ,.;-i Press ~ . Touch then . The Bluetooth screen appears. Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.
Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device. To disconnect the device, touch the name of the connected device in the list. - NOTE Connect the Bluetooth device manually in the following cases: • Two or more Bluetooth devices are registered, and you want to manually select the device to be used.
1a abcdefghi \.; abcdefghi ... abcdefghi ~ abcdefghi English abcdefghi - X Phone Book i!il The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone G) Using preset dial list (page 66) Using phone book Select a contact from the phone book. Touch the desired name on the list then select the phone number.
I Using the preset dial lists I ▶Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Press . . [!!] 4 Touch ~ . Touch or ~ . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . []DJ ow ▶Dialing from the preset dial list 1 2 Touch [DJ . Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number 1 2 3 4 5 Press . Touch . Touch . Touch .
I Voice recognition function NOTES • When an iPhone running iOS 6.1 or higher is used, Siri® Eyes Free Mode is available with this product. • For using this function with a smartphone, the device must be compatible with Android Auto. For using the voice recognition function with a smartphone, launch Android Auto beforehand. 1 2 3 Press . QO. Touch ~. 00 Touch . The voice recognition function launches and the voice control screen appears.
1==================1 Setting the private mode During a conversation, you can switch to private mode (talk directly on your cellular phone). 1 Touch or to turn private mode on or off. English - NOTES • If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
• The registered name will appear if the phone number is already registered in the phone book. When the same phone number is registered under different names, only the phone number will be displayed. ▶The received call and dialed number histories ▶Phone book transfers • If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely. • Depending on the phone, this product may not display the phone book correctly.
6 7 Touch . The AV source screen appears. Touch [Bluetooth Audio]. The Bluetooth audio playback screen appears. Bluetooth audio playback screen 1 Switches between playback and pause. Skips files forward or backward. • By pressing then touch or backward. • By pressing then touch and hold reverse or fast forward. - , you can also skip files forward or or , you can also perform fast Selects a file or folder from the list to playback.
Bluetooth audio playback screen 2 English Sets a repeat play range. Plays files in random order.
IWi-Fi You can connect your Wi-Fi certfied mobile device to this product via Wi-Fi connection. 1 2 3 4 5 6 7 Turn on the Wi-Fi function on the device. Press . Touch then . Touch [Wi-Fi Settings]. Set [Wi-Fi] to [ON]. Touch [Device Information]. Connect this product with the dislayed network name in [Device Information] from the mobile device. Wi-Fi settings 1 2 3 ,.;-i Press ~ . - Touch then English Wi-Fi connection . Touch [Wi-Fi Settings].
Wi-Fi audio Before using the Wi-Fi audio player, connect the device to this product via Apple CarPlay™ (page 104) or Android Auto wirelessly (page 108). 1 2 ,-;;-i Press ~ then touch . - NOTES • [Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use. • [Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use. Basic operation Wi-Fi audio screen (Example: Apple CarPlay) Wi-Fi audio with Apple CarPlay operation is same as the iPod source function.
AV source Supported AV source * AVIC-W8400NEX Displaying the AV operation screen 1 Press then touch the AV operation key. The AV operation screen appears. - 74 - English You can play or use the following sources with this product. • HD Radio Broadcasts (HD Radio™ tuner) • CD • ROM (compressed audio or video files on discs) • DVD-Video • Video-CD The following sources can be played back or used by connecting an auxiliary device.
English Displays the source list. Shows the navigation information. This is not displayed for some sources. Recalls equalizer curves (page 146). Selecting a source Source on the AV source selection screen 1 2 Press . then touch ~. QD Touch the source icon. When you select [Source OFF], the AV source is turned off. I Source on the source list 1 2 3 I Press . QD then touch the AV operation key. Touch ~. Touch the source key. When you select [Source OFF], the AV source is turned off.
I Changing the display order of source icons 1 2 Press . [!!] then touch ~. Touch and hold the source icon and drag the icon to the desired position. . [!!] then touch the AV operation key. Touch [Y]. Press Touch ~. Drag the source key to the desired position. Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. ,.;-i 1 2 3 Press ~ . Touch and hold .
Setup for iPod®/iPhone® or smartphone - NOTES • Operation methods may vary depending on the iPod/iPhone model or smartphone and its software version. • Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be compatible with this unit. • The setting may not be operable right after it is changed. • This setting is available only when a hands-free telephone is not used. • The setting will change after the following processes are automatically executed.
3 4 5 Touch [Smartphone Setup]. Touch [iPhone/iPod]. The available function icons are displayed. Touch [OK]. Smartphone (Android™ device) Compatible smartphones Compatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website. 1 2 3 4 5 6 7 ,.;-i Press ~ . Touch then . Touch [Smartphone-related Settings]. Touch [Smartphone Setup]. Touch [Others]. Touch [Android Auto] to use Android Auto.
IHD Radio™ Technology About HD Radio stations AM band Analog AM Analog AM Digital AM FM band Analog FM Analog FM Digital FM Analog FM Digital FM-1ch 1 ---------Digital FM-2ch ■ : Main channel : Sub channel Digital FM-3ch Digital Sound) Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. PSD) - 79 - English HD Radio stations offer high quality audio and data services.
Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. HD2/HD3) Artist Experience) Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content. Starting procedure 1 2 Press then touch . Touch [HD Radio]. The HD Radio screen appears.
i b Recalls the preset channel stored to a key from memory. ~ Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. I FM1 Selects the FM1, FM2, FM3 or AM band. AM I ~~ ~ TIPS • By pressing • By pressing b Performs manual tuning. ~ Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds skips to the nearest station from the current frequency.
Radio settings 1 2 - Touch then . The system setting screen appears. English 3 4 ,.;-i Press ~. Touch [AV Source Settings]. Touch [Radio Settings]. The menu items vary according to the source. Menu Item Description [Blending] [On] [Off] Switches to the analog broadcast of the same frequency level automatically when reception of a digital broadcast becomes weak. Select [Off] to receive only a digital signal. [Seek] Select the method of seek tuning.
IDisc Inserting and ejecting a disc - English You can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. A WARNING W8400NEX Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. A CAUTION Do not insert anything other than a disc into the disc-loading slot. !... =---=-=----_-__-_- _-_-_-_-_- _----=-==1 Inserting a disc W8400NEX 1 2 3 Press ~ .
1 Press . Basic operation - Audio_ source_ _ _ _ _ _ _ _ _ _ 1 1_ Audio source screen 1 Switches between playback and pause. Skips files forward or backward. Selects a track from the list. Touch a track on the list to play back. - 84 - English TIPS • By pressing then touch or , you can also skip files/chapters forward or backward. • By pressing then touch and hold or , you can also perform fast reverse or fast forward. • If a Video-CD with PBC (playback control) On is being played, El appears.
Audio source screen 2 English Sets a repeat play for the current disc/the current track. Plays or does not play tracks in random order. source_ _ _ _ _ _ _ _ _ I IVideo_ A CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Video source screen 1 II I◄◄ li!I 01 □ 01 _, i)... °' ■ ◄◄ G) II ► MENU TOP """ ~ 0 10 1/2) ►► '- Hides the touch panel keys.
BB f• I Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. {J ~ - Performs frame-by-frame playback. Performs slow-motion playback. Each time you touch ~ , it changes the speed in four steps in the following order: 1/16 -> 1/8 -> 1/4 -> 1/2 ~ 1 ~1 Displays the DVD menu. NOTE This function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu. [i[]~ ~ Switches the audio/subtitle language.
Video source screen 2 a .. ~ . "1 7 , ll! 01 t:JOl LL ►'" - (J f,' "" "' ◄◄ ~ Return ►► ~ Cl! 2/2 English 0. < '- Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Sets a repeat play for all files/the current chapter/the current title. Displays the DVD menu keypad.
ICompressed files SD function is only available for AVIC-W8400NEX. You can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. - English Inserting and ejecting media A WARNING W8400NEX Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. A CAUTION • Do not insert anything other than a disc into the disc-loading slot.
1 2 3 Press . Touch to open the LCD panel. - . W6400NEX 1 Press ~. Inserting an SD_ memory card _ _ _ _ _ _ 1 1_ _ _ W8400NEX 1 2 3 4 Press ~ . Touch [CG] to open the LCD panel. Insert an SD memory card into the SD card slot. - Press . NOTES • This system is not compatible with the Multi Media Card (MMC). • Compatibility with all SD memory cards is not guaranteed. • This product may not achieve optimum performance with some SD memory cards.
• Connection via a USB hub is not possible. • A USB cable is required for connection. English USB cable USB storage device IUnplugging a USB storage device I 1 Pull out the USB storage device from the USB cable. NOTES • Check that no data is being accessed before pulling out the USB storage device. • Turn off (ACC OFF) the ignition switch before unplugging the USB storage device. Starting procedure I For Disc 1 Insert the disc (page 88).
- NOTES • For details on inserting SD card see on Inserting an SD memory card (page 89). • For details on plugging USB storage device, see on Plugging a USB storage device (page 89). Basic operation Audio source I_ _________I Audio source screen 1 (Example: USB) a - Close your eyes Jane ·'\.i G) I◄◄ r!1r ~ tJ 055 ►►t Fune.) (J ., f 0 CD \.'. Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 92).
Switches the current music information display. i:=7 L=J Selects a file from the list. Touch a file on the list to playback. NOTE When you play compressed audio files stored in an external storage device (USB, SD), you can search for a file using Music Browse (page 92). Audio source screen 2 (Example: USB) Selects the previous folder or the next folder. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order.
1 2 3 4 . Touch the [Tag] tab. Touch the desired category to display the file list. Touch the item. Refine the item until the desired song title or file name is displayed on the list. Touch the desired song title or file name to play back. If the selection made with Music Browse has been canceled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track.
BB 0 Stops playback. 6 Performs frame-by-frame playback. ~ Performs slow-motion playback. ~[§] Sets a repeat play range for all files/the current folder/the current file. [ili][®] Switches the audio/subtitle language. [§] - Selects a file from the list. Touch a file on the list to playback. [g][g] TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. I~ II11+1 I 6 Skips files forward or backward. ~ Performs fast reverse or fast forward.
Still image screen English CD Hides the touch panel keys. To display the keys again, touch anywhere on the screen. ~ Switches between playback and pause. ~ Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files 1,...11~1 Skips files forward or backward. ~[fil Selects the previous folder or the next folder. @] Rotates the displayed picture 90° clockwise. ~[g] Sets a repeat play range for all files/the current folder.
IiPod Connecting your iPod NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music® app from your iPod since some functions may not be available. • When connecting an iPhone or iPod touch, quit all applications before connecting the device. 1 2 3 Connect your iPod via USB. Press then touch . Touch [iPod]. NOTE For details on USB connection, refer to the Installation Manual.
Audio source 1_ _________1 - Audio source screen 1 English G) Displays the link search screen. Select a song from the list related to the song currently playing. - TIP If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause. Skips files forward or backward. Selects a song from the list. Touch the category then the title of the list to playback of the selected list.
Audio source screen 2 English - - Changes the audiobook speed. Normal—Fast—Slow G) NOTE The audiobook speed icon may not change depending on the connected iPod/ iPhone. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Music®_ Radio_ source_ _ _ _ _ _ _ I IApple_ - ~ Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.
Apple Music Radio screen :: a 'A' * ►►I \. Switches between playback and pause. Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes® wish list. - NOTE This function may not be used depending on your Apple Music account status. Skips tracks forward. - 99 - English ,~ ~ ..
IAppRadio Mode + You can operate iPhone or smartphone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. Compatible smartphone (Sound from AppRadio Mode + on some Android devices cannot be heard from the speakers of this unit.) models For details about Android device compatibility with this product, refer to the information on our website.
Starting procedure When connecting an iPhone or a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod®/iPhone® or smartphone (page 77). .. AppRadio Mode + a iii1 ~ 1 21 Cal~~dar - I...' [D .... ~ . I='. "'''" ✓ - e D G) Displays the current source. Displays the launcher application screen. Displays the previous screen. Displays the menu screen. • Press then touch to hide the AppRadio Mode + SideControlBar.
2 3 4 5 ,.;-i Press ~ . Touch []]. Touch [AppRadio Mode]. - IFor smartphone (Android) users I NOTE The video playback capability depends on the connected Android device. 1 2 3 4 5 Unlock your smartphone and connect it to this product via USB. Refer to the Installation Manual. ,.;-i Press ~ . Touch . Touch [AppRadio Mode]. Touch desired icon in the tab. The AppRadio app is launched.
Using the audio mix function NOTES • Depending on the application or AV source, this function may not be available. • When the audio mix function is set to on, the voice guidance of the navigation system is not output. To output the voice guidance of the navigation system, set the audio mix function to off. 1 2 Start up the AppRadio Mode +. Press VOL (+/-). The audio mix menu will be displayed on the screen. NOTES • The audio mix menu is displayed for four seconds.
IApple CarPlay™ You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. - NOTE The compatible finger gestures vary depending on the application for the iPhone. A WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. English - Starting procedure When connecting an iPhone to this product, settings are required according to the connected device. For details, refer to Setup for iPod®/iPhone® or smartphone (page 77). IWired connection 1 2 3 4 5 I Connect an Apple CarPlay compatible device to this product via USB. ,.;-i Press ~ . Touch []].
The unit configures the connection then start the application. TIP You can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. once Apple CarPlay is activated. NOTES • For details on USB connection, refer to the Installation Manual.
IAndroid Auto™ Compatible Android devices For details about compatibility of Android models, refer to the following website. https://support.google.com/androidauto - NOTE The compatible finger gestures vary depending on the application for the smartphone. A WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. English - Starting procedure When connecting a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod®/iPhone® or smartphone (page 77). IWired connection 1 2 3 4 5 I Connect an Android Auto™ compatible device to this product via USB. Press . Touch . Touch [Android Auto].
5 Touch a desired device on the screen. The unit configures the connection then start the application. once Android Auto is activated. NOTES • For details on USB connection, refer to the Installation Manual. • If twenty devices are already paired, the message confirming whether to delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch [BT Settings] and delete the devices manually (page 64).
- NOTE Android Auto will launch automatically only when an Android Auto compatible device is correctly connected to this product. Press Touch . then . Touch [Smartphone-related Settings]. Touch [Android Auto Auto-launch] to switch [On] or [Off].
IPandora® A WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important Create a free or a paid account online.
• For details on USB connection, refer to the Installation Manual. Basic operation Playback screen 1 pondoro II 2 Shuffle 3 J, 4 0 5 6 Ill I 111':111 i ►~ "' " 112 ) \: Recalls the preset station stored to a key from the memory. Stores the current station to a key. Displays the preset station list. Select an item on the list ([1] to [6]) to switch to the preset station. 1111 1111 Switches between playback and pause. m D D Ill II t:,~ -~ I 24 (J Skips tracks forward.
TIP Shared stations are indicated by [I] . * and are not available when using a shared station. Playback screen 2 a - pondora 2 Shuffle 3 . t:J; f 4 0 5 6 II oee (J ~ 2/2 ( \: Creates a new station. Touch [Track] or [Artist] to create a new station. Adds information for the track currently playing to bookmarks. - 113 - English Selects a Pandora station from the list. • : Switches to the station list. • : Switches to the genre list.
ISiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Press then touch . Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging.
• The activation process usually takes 10 to 15 minutes, but it may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message. - Listening to SiriusXM Press then touch . English 1 2 Touch [SiriusXM]. Basic operation TIPS • By pressing @J then touch B or El, you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen.
Displays the preset channels. Select an item on the list ([1] to [6]) to switch to the preset channel. lfeatur~ I Selects a band. There are 4 bands. You can store 6 channels per band for a total of 24 presets. I~ I Performs TuneScan™ (page 117). ~ ' - Switches TuneMix™ to on or off. You can use TuneMix™ to play a unique blend of songs from each of the music channels stored as presets on the current band. NOTES • When fewer than two music channels are stored as presets, you cannot use TuneMix™.
Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch . - NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Replay Mode (Time bar display) a 9 24 (J 2 Featured 3 1e Groove 4 Denroy Morgan I'll Do Anything ft 5 6 Tune Mil II ◄◄ ~ If {(< SiriusXffl>)) ►► \.'.
• TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. • Tune Scan™ is compatible with SXV200 or later tuner models (sold separately). rfimel 1 Touch ~ to display the following display. l a : l i) 3 CHl 01 xl ~ (()) ·- 4 5 6 ► I◄◄ ' ►►l X ~ Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan.
Using Featured Favorites Band English Featured Favorites are groups of channels that are created by the SiriusXM Programming department allowing you to discover new channels. Featured Favorite channels are dynamic and can change often, allowing you to discover new channels. For details, see [Featured Favorites] and [Featured Band Update Messages] in SiriusXM settings (page 120). 1--=--=--=--=-=-========= IHow to access When there is a Featured Favorite, access it with the band key. 1 Touch the band key.
TIP To set the alert function, you can set up at [Alert List] (page 120) in the [SiriusXM Settings]. - SiriusXM settings 3 4 Press . English 1 2 Touch then . The system setting screen appears. Touch [AV Source Settings]. Touch [SiriusXM Settings]. The menu items vary according to the source. Menu Item Description [Tune Start] [On] [Off] Start songs automatically from the beginning when you tune to one of your preset channels in the current preset band when TuneStart™ is turned on.
Menu Item [Featured Favorites] [On] [Off] Description NOTE If the Featured Favorite Band needs to update, the Featured Band Update message will appear. [Featured Band Update Messages] [On] [Off] To be notified when the featured seasonal theme is updated. TIP To display [Featured Band Update Messages] at all times, [Featured Favorites] needs to be set to [On]. [SportsFlash] [On] [Off] Activates the SportsFlash™ function. • Touch [Play] to listen to the notified channel.
IHDMI A CAUTION NOTE A High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 Press then touch . Touch [HDMI]. The HDMI source screen appears. Basic operation HDMI source screen G) Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 157).
IAUX You can display the video image output by the device connected to video input. - NOTES • A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. For details, refer to the Installation Manual. • You can set the screen size for the video image (page 157). Starting procedure 1 2 3 4 5 6 ,.;-i Press ~ . Touch then []I]. Touch [Input/Output Settings]. Confirm that [AUX Input] is turned on. ,.;-i Press ~ then touch . Touch [AUX]. The AUX screen appears.
Basic operation - AUX screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 157). Switches between the video input and audio input.
IAV input You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 7 Press . Touch then . Touch [Input/Output Settings]. Touch [AV Input]. Touch [Source] for AV source or [Camera] for camera. ,-;;-i Press ~ then touch . - Touch [AV] for AV source or [Camera View] for camera. The image is displayed on the screen.
Basic operation - AV source screen English G) Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
IWireless Mirroring Starting procedure Wireless Mirroring operations and procedures vary depending on the connected mobile device. Refer to the instruction manual that came with your mobile device. A CAUTION For safety reasons, this function is available only when you stop your vehicle in a safe place and apply the parking brake. 1 2 3 4 5 6 7 8 Press Touch . then . Touch [Wi-Fi Settings]. Confirm that [Wi-Fi] is turned on. Press then touch . - Touch [Mirroring].
Basic operation Wireless Mirroring screen (Example) English - G) Displays Full screen. [Disconnect] Disconnects Wireless Mirroring. - NOTES • The screen shown in the example may differ from the connected mobile device. • If the Android device is not ready for Miracast UIBC, you cannot perform touch operation.
iDatalink Using iDatalink - NOTE Since the type of module varies depending on the vehicle model, search for your vehicle at the following URL to determine what features are available for each module. Remember to select the correct radio model for accurate results. http://maestro.idatalink.com/ Important • For details about vehicle models that are compatible with the iDatalink adapter, refer to the information on our website.
2 Access the following website and follow the on-screen instructions to configure the desired firmware. http://maestro.idatalink.com/ Install the vehicle/head unit specific firmware on your iDatalink Maestro module. Connect this product to iDatalink Maestro, and then install this product to the vehicle. The iDatalink function will be active. English 3 4 NOTE When the serial number input is required, input the device number of this product.
~ Displays the Gauge screen. Displays the Vehicle Information screen. ~l3J~J__ _ _ _ _ _ _ Displays the Climate screen. English T1.1 I Displays the Parking Assist screen. Gauges screen Vehicle Information screen II Vehicle Information ""Ii 23.0psi Q .... IJ :o X Low Trip Pressure Ol 23.
Climate screen Climate II C) Rea r X 0UT TEMP700°F 0 ~==• 72.0'C ,. l.1 ::o ,; ~ Ma1A/C 'iii' Auto lilfJ A/C ;y " + Cl 71 .0"C ,. Dual lilfJ [ml ;y C1 Parking Assist screen ~ Parking Assist II X xxxxxxxxxxxxxxxxxx 0 ~==~ ,,~==~,, =-;;:::: -"II ,,, \II '.1 ::o 11\ 1// ''k--di'' ~ ;::'::~ ~ .::::::::::::- C1 Cl Displaying obstacle detection information A CAUTION - This function is intended solely to assist the driver’s vision.
Menu Item Description [OEM Settings] Setting for iDatalink function when the iDatalink adapter is connected to the unit. [OEM Volume Settings] Setting for iDatalink function volume when the iDatalink adapter is connected to the unit.
ISettings You can adjust various settings in the main menu. 1 2 3 Press Touch . . Touch one of the following categories, then select the options. System settings (page 134) Theme settings (page 143) Audio settings (page 145) Video settings (page 152) Bluetooth settings (page 63) System settings The menu items vary according to the source.
1_ _ _ Settings] _ _ _ _ _ _ _1 [Smartphone-related Description [Smartphone Setup] Setting the connected mobile device (page 77). [Driving Position] [Right] [Left] Setting the driving position. • Apple CarPlay™ (page 104) • Android Auto™ (page 107) [Android Auto Autolaunch]* [On] [Off] Select [On] to automatically launch Android Auto when an Android device is connected to the unit.
▶Camera for Camera View mode Camera View can be displayed at all times. Note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. To display the camera image, touch [Camera View] on the AV source selection screen (page 75). A CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
Menu Item [Ground] Description The polarity of the connected lead is negative. NOTE If the camera polarity setting is wrong, or wrong camera setting is made, press RESET button to release the rear view camera screen and then change the camera polarity setting to [Battery]. Menu Item Description [Wi-Fi Settings] (page 72) [Demo Mode] Menu Item Description [Demo Mode] [On] [Off] Setting the demo mode. [System Language] Menu Item Description [System Language] Select the system language.
Menu Item [Audio Settings] - Description Restore to default Audio settings. NOTE This setting is available when the source is turned off. [Theme Settings] [Keyboard] Menu Item [Keyboard] Restore to default Theme settings. Restore to default Bluetooth settings. Description You can use the keyboard in AppRadio Mode + by setting the language of the keyboard for iPhone. NOTES • Set the same system language setting as the iPhone to operate this function properly.
Description [Touch Panel Calibration] 1 Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice. 2 Press . The adjustment results are saved. 3 Press once again. Proceed to 16-point adjustment. 4 Gently touch the center of the [+] mark displayed on the screen. The target indicates the order. • When you press [ii], the previous adjustment position returns. • When you press and hold , the adjustment is canceled. 5 Press and hold [iiJ.
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or . You can use this function when [Dimmer Trigger] is set to [Time]. - NOTE The time display of the dimmer duration adjusting bar depends on the clock display setting (page 157). [Picture Adjustment] 1A=-==---===---==================== == I You can adjust the picture for each source and rear view camera.
- * With some pictures, you cannot adjust [Hue] and [Color]. [System Information] Menu Item [Firmware Information] Description Displays the firmware version. TIP You can also check the open source license of the functions that this product is equipped with by touching [License] in this menu. [Firmware Update] A CAUTION • The external storage device for updating must contain only the correct update file.
Description [3D Calibration Status] Check the sensor learning status, such as the degree of learning. You can also check the current sensor values and the total number of speed pulses. To delete the learned results stored in the sensor, follow the below instructions. 1 Touch [Distance] or [Speed Pulse], and then touch [Yes]. 2 Touch [Learning] and then touch [Reset All]. - TIP Touch [Reset All] to reset the sensor after changing the installation position or angle.
Menu Item [iDataLink] Description Displays the status of the optional iDatalink adapter. [OEM Settings] Description [OEM Settings] (page 133). [OEM Volume Settings] Menu Item Description [OEM Volume Settings] (page 133). Theme settings A CAUTION Do not turn off the engine while importing an image from the external storage device. The menu items vary according to the source.
Menu Item Description [Illumination] Select an illumination color from the color list or create a defined color. Colored Keys (custom) Select the desired preset color. Displays the screen to customize the illumination color. To customize the defined color, touch then touch or to adjust the brightness and the level of red, green and blue to create favorite color.
-- NOTES • If multiple external storage devices that include available data are connected to this product, the order of priority for the targets that the Theme settings are exported to or imported from is as follows: W8400NEX - W6400NEX (j) USB storage device (USB port 1) @USB storage device (USB port 2) • This setting is available only when you stop your vehicle in a safe place and apply the parking brake. ▶Exporting Theme settings 1 2 3 4 5 6 Set the external storage device (page 88). ,.
Menu Item Description [Graphic EQ] [Super Bass] [Powerful] [Natural] [Vocal] [Flat] [Custom1] [Custom2] Select or customize the equalizer curve. Select a curve that you want to use as the basis of customizing then touch the frequency that you want to adjust. [Fader/Balance] Touch or to adjust the front/rear speaker balance. Set [Front] and [Rear] to [0] when using a dual speaker system. Touch or to adjust the left/right speaker balance.
Description [Source Level Adjuster] [-4] to [+4] Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM. Touch or to adjust the source volume after comparing the FM tuner volume level with the level of the source. TIP If you directly touch the area where the cursor can be moved, the SLA (source level adjustment) setting will be changed to the value of the touched point.
Description [Time Alignment] [On] [Off] Listening position*1*2 [Off] [Front Left] [Front Right] [Front] [All] Standard Mode*3*4 [Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer] Network Mode*3*4 [High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer] Distance [0] to [140] Select or customize the time alignment settings to reflect the distance between the listener’s position and each speaker. You need to measure the distance between the head of the listener and each speaker unit.
Menu Item [Rear Speaker Output] [Rear] [Subwoofer] - Description Select the rear speaker output. Compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. [Off] Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).
– When the speakers are incorrectly connected. (For example, when a rear speaker is connected as a subwoofer output.) – When a speaker is connected to a power amp delivering output higher than the speaker’s maximum input power capability. • If a microphone for acoustical measurement (sold separately) is not placed in the appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location.
- NOTE If driving restrictions are detected during measurement, the measurement is canceled. 2 5 6 7 8 9 Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 75). Press Touch . then . Touch [A-EQ&TA Measurement]. -- Connect the microphone for acoustical measurement (sold separately) with this product. W8400NEX Plug the microphone into the Auto EQ microphone input jack on this product (page 6).
TIP To stop the measurement, touch [Stop]. 14 Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change, or malfunction. You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer. [Network Mode]: High, Mid, Subwoofer.
Description [Subtitle Language]*1*2 Set a subtitle language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Audio Language]*1*2 Set an audio language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Menu Language]*1*2 Set a menu language preference. When you select [Others], a language code input screen is shown.
Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. 1 Touch [0] to [9] to input a four-digit code number. 2 Touch . Registers the code number, and you can now set the level. 3 Touch any number between [1] to [8] to select the desired level. The lower the level is set, the tighter the restriction is applied. 4 Touch . Sets the parental lock level.
Menu Item Description [DVD Auto Play] [On] [Off] - Set to display the DVD menu automatically and start playback from the first chapter of the first title when a DVD disc with a DVD menu is inserted. English NOTE Some DVDs may not operate properly. If this function is not fully operable, turn this function off and start playback. *1 You can switch the language by touching the switch languages key during playback.
IFavorite menu NOTE Up to 12 menu items can be registered in the favorite menu. Creating a shortcut 1 2 Press then touch . Touch the star icon of the menu item. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 Press then touch Touch . . Touch the menu item. Removing a shortcut 1 2 3 Press then touch Touch . . Touch and hold the favorite menu column.
Other functions Setting the time and date Touch the current time on the screen. Touch one of the items to adjust. • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. Changing the wide screen mode You can set the screen mode for AV screen and image files. 1 Touch the screen display mode key. Screen display mode key G) 2 Touch the desired mode.
TIPS • Different settings can be stored for each video source. • When a video is viewed in wide screen mode that does not match its original aspect ratio, it may appear different. • The video image will appear coarser when viewed in [Zoom] mode. Selecting the video for the rear display You can choose either to show the same image as the front screen or to show the selected source on the rear display.
[Source OFF] Nothing is output to the rear display. * AVIC-W8400NEX Setting the anti-theft function Important If you forgot your password, contact the nearest authorized Pioneer Service Station. ________I ISetting the password 1 2 3 ,.;-i Press ~. Touch then . Touch 1, followed by 2, and then touch 3. * AV Source Settings 8' Smartphone -related Sett ings 41} Input/Output D Came rasen ings 0 Wi-F i Settings 1 4 5 6 7 8 9 DDD x System XI Settings Touch [Set Password].
1-the- - - - - - - - -1 Deleting password The current password and password hint can be deleted. 1 Press . Touch then . Touch 1, followed by 2, and then touch 3 (page 159). Touch [Clear Password]. Touch [Yes]. Touch [OK]. Enter the current password. Touch [Go]. A message indicating that the security setting is canceled appears. Restoring this product to the default settings You can restore settings or recorded content to the default settings from [Restore Settings] in the [System] menu (page 137).
Appendix If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Common problems 1-- The screen is covered by a caution message and the video cannot be shown. → The parking brake lead is not connected or the parking brake is not applied.
The picture stops (pauses) and this product cannot be operated. → The reading of data is impossible during disc playback. – Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio. → The aspect setting is incorrect for the display. – Select the appropriate setting for that image. A parental lock message is displayed and DVD playback is not possible. → The parental lock is on. – Turn the parental lock off or change the level.
Black screen displayed when the vehicle is in reverse, with no camera installed. → Back camera input is set to On. – Turn the setting to Off in the settings menu. (Refer to the System Settings section of this manual to adjust.) Back image displayed when vehicle is not in reverse. → The camera polarity is not set properly in the Camera settings menu. – Review System Settings section of this manual for steps to switch the camera polarity.
occurs when the reverse gear polarity setting of this product is incorrect. – Check the polarity and re-select the correct setting. problem, contact your dealer or an authorized Pioneer Station for assistance. Error messages Common I_ _ _ _ _I AMP Error → This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. – Check the speaker connection.
Detected changes in the installation angle or position. The in-dash receiver is updating the sensor learning data. → Changes in the installation angle or position are detected. – Wait until the sensor learning finishes. Pandora I_ _ _ _ _I Error-19 (Communication error occurred.) → Communication failed. – Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it. Poor network connection. Listening will resume when it’s restored.
– Verify that your vehicle is outdoors with a clear view of the southern sky. – Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. – Move the SiriusXM antenna away from any obstructions. Channel Not Available → The channel that you have requested is not a valid SiriusXM channel. – Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
Disc 1_ _ _1 Different Region Disc → The disc does not have the same region number as this product. – Replace the DVD with one bearing the correct region number. Unplayable Disc → This type of disc cannot be played on this product. – Replace the disc with one that can be played on this product. Unplayable File → This type of file cannot be played on this product. – Select a file that can be played. Unable to write to flash memory. → The playback history for VOD contents cannot be saved for some reason.
switch to OFF, then to ACC or ON and then connect a compliant USB storage device. HUB Error → The connected USB hub is not supported by this product. – Directly connect the USB storage device to this product. Skipped → The connected external storage device (USB, SD) contains DRM protected files. – The protected files are skipped. Protect → All the files on the connected external storage device (USB, SD) are embedded with DRM. – Replace the external storage device (USB, SD).
Audio Format not supported → This type of file is not supported on this product. – Select a file that can be played. If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station. 1_ W8400NEX Error-02-6X/-9X/-DX → iPod failure. – Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it. Error-02-67 → The iPod firmware version is old. – Update the iPod version.
the screen. If the error message is still displayed after performing on-screen instructions, please reconnect the device. Positioning technology The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 68 900 000 feet (21 000 km), continually broadcasts radio signals giving time and position information. This ensures that signals from at least three can be picked up from any open area on the ground’s surface.
the sensor status and it may recover the accuracy to normal condition (page 142). With map matching I_ _ _ IWhen positioning by GPS is impossible • GPS positioning is disabled if signals cannot be received from more than two GPS satellites. • In some driving conditions, signals from GPS satellites may not reach your vehicle. In this case, it is impossible for the system to use GPS positioning.
If there is a parallel road. When driving through a dense forest or tall trees English • If a car phone or cellular phone is used near the GPS antenna, GPS reception may be lost temporarily. • Do not cover the GPS antenna with spray paint or car wax, because this may block the reception of GPS signals. Snow buildup can also degrade the signals, so keep the antenna clear. - If there is another road very nearby, such as in the case of an elevated freeway.
If you drive in zigzags. If you take a ferry. English If the road has a series of hairpin bends. If you are driving on a long, straight road or a gently curving road. If there is a loop or similar road configuration. If you are on a steep mountain road with many height changes.
If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. If you put on chains, or change your tires for ones with a different size. English If trees or other obstacles block the GPS signals for a considerable period. If your vehicle is turned on a turntable or similar structure. If you drive very slowly, or in a startand-stop manner, as in a traffic congestion. If your vehicle’s wheels spin, such as on a gravel road or in snow. 0 0 0 00 0 0 o .
If you join the road after driving around a large parking lot. ~ :' 0 (· When starting driving immediately after starting the engine. Route setting information Route search specifications 1_ _ _ _1 Your navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. A CAUTION When a route is calculated, the route and voice guidance for the route are automatically set.
Route highlighting • Once set, the route is highlighted in bright color on the map. • The immediate vicinity of your starting point and destination may not be highlighted, and neither will areas with particularly complex road layouts. Consequently, the route may appear to be cut off on the display, but voice guidance will continue. Auto reroute function • If you deviate from the set route, the system will re-calculate the route from that point so that you remain on track to the destination.
Playable discs DVD-Video I ______ I is a trademark of DVD Format/Logo Licensing Corporation. • It is not possible to play DVD Audio discs. This DVD drive may not be able to play all discs bearing the marks shown above. I CD I Dolby Digital 1______ 1 This product will down-mix Dolby Digital signals internally and the sound will be output in stereo. • Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
DVD-Video discs • DVD-Video discs that have incompatible region numbers cannot be played on this DVD drive. The region number of the player can be found on this product’s chassis. CD-R/CD-RW discs • Unfinalized discs cannot be played back. • It may not be possible to playback CD-R/ CD-RW discs recorded on a music CD recorder or a computer because of disc characteristics, scratches or dirt on the disc, or dirt, scratches or condensation on the lens of the built-in drive.
USB storage device • For details about USB storage device compatibility with this product, refer to Specifications (page 188). • Protocol: bulk • You cannot connect a USB storage device to this product via a USB hub. • Partitioned USB storage device is not compatible with this product. • Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or gas pedal.
• If multiple subtitles are programmed to display within a very short time frame, such as 0.1 seconds, the subtitles may not be displayed at the correct time. Media compatibility chart I ______ I General • Files may not be played back properly depending on the environment in which the file was created or on the contents of the file. • This product may not play back files, depending on the application used to encode the files.
MAX. FILE No. FAT16, FAT32: 65 536 NTFS: No limit TRANSMISSION RATE SAMPLING FREQUENCY TRANSMISSION RATE ID3 TAG 16 kHz to 48 kHz 8 kbps to 320 kbps, VBR USB: v1,v1.1,v2.2,v2. 3,v2.4 Disc: v1,v1.1,v2.2,v2. 3 TRANSMISSION RATE USB: 32 kHz to 48 kHz Disc: 8 kHz to 48 kHz USB: 48 kbps to 320 kbps (CBR), VBR Disc: 5 kbps to 320 kbps (CBR), VBR LPCM 16 kHz to 48 kHz TRANSMISSION RATE SAMPLING FREQUENCY WAV compatibility • The sampling frequency shown in the display may be rounded.
Audio and video files compatibility (USB, SD) • Files may not be able to be played back depending on the bit rate. • Only USB storage devices can play back VOB files. Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263, Xvid 1 920 x 1 080 30 fps .mp4 Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 x 1 080 30 fps .3gp Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 x 1 080 30 fps ------+--.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. WMA/WMV Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Wi-Fi ffijFiJ FLAC CERTIFIED The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. HD Radio™ Technology HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.
DivX Google™, Google Play, Android Google, Google Play and Android are trademarks of Google LLC. Android Auto android auto Android Auto is a trademark of Google LLC. Dll~X:. DivX® Home Theater Certified devices have been tested for high-quality DivX Home Theater video playback (including .avi, .divx). When you see the DivX logo, you know you have the freedom to play your favorite videos. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
iPhone, iPod and Apple _ CarPlay_ _ _ 1 1_ _ _Lightning® _ _ 11 _ Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
• Connection to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. • Optional Pioneer adapter cable connecting your iPhone to this product. Pandora® Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.
Notice regarding DVDVideo viewing Map coverage For details about the map coverage of this product, refer to the information on our website. Using the LCD screen correctly Notice regarding MP3 file usage - Handling the LCD screen I_ _ _I Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e.
Maintaining_ the LCD screen I_ _I • When removing dust from or cleaning the LCD screen, first turn this product off and then wipe the screen with a soft dry cloth. • When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. I_ _ _I LED (light-emitting diode) backlight A light emitting diode is used inside the display to illuminate the LCD screen.
Display Screen size/aspect ratio: (AVIC-W8400NEX) 6.94 inch wide/16:9 (effective display area: 156.24 mm × 81.6 mm) (6-1/8 in. × 3-1/4 in.) (AVIC-W6400NEX) 6.2 inch wide/16:9 (effective display area: 137.52 mm × 77.232 mm) (5-3/8 in. × 3 in.
DVD drive System: DVD-V, VCD, CD, MP3, WMA, AAC, DivX, MPEG player Usable discs: DVD-VIDEO, VIDEO-CD, CD, CD-R, CDRW, DVD-R, DVD-RW, DVD-R DL Region number: 1 Frequency response: 5 Hz to 44 000 Hz (with DVD, at sampling frequency 96 kHz) Signal-to-noise ratio: 96 dB (1 kHz) (IHF-A network) (RCA level) Video output level: Video: 1.0 V p-p/75 Ω (±0.2 V) Number of channels: 2 (stereo) MP3 decoding format: MPEG-1 & 2 & 2.5 Audio Layer 3 WMA decoding format: Ver.
JPEG decoding format: JPEG H.264 video decoding format: Base Line Profile, Main Profile, High Profile WMV video decoding format: VC-1 SP/MP/AP, WMV 7/8 MPEG4 video decoding format: Simple Profile, Advanced Simple Profile (except GMC) JPEG decoding format: JPEG H.
1, 6, 11 ch (2.4 GHz) 149, 151, 155 ch (5 GHz) Security: WPA 2 (personal) Output power: +16 dBm Max (2.4 GHz) +13 dBm Max (5 GHz) English - CEA2006 Specifications Power output: 14 W RMS × 4 Channels (4 Ω and < = 1% THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) - NOTE Specifications and design are subject to possible modifications without notice due to improvements.
Register your product at http://www.pioneerelectronics.com in Canada http://www.pioneerelectronics.ca To keep up to date with the latest navigational data, you can periodically update your navigation system. For further details, please visit: http://pioneer.naviextras.com ~ pioneer.naviextras.com PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
Pioneer English Français AVIC-W8400NEX AVIC-W6400NEX Español MULTIMEDIA NAVIGATION RECEIVER RÉCEPTEUR DE NAVIGATION MULTIMÉDIA RECEPTOR DE NAVEGACIÓN MULTIMEDIA Installation Manual Manuel d’installation Manual de instalación
Important safety information A WARNING Rear visibility systems (backup cameras) are required in certain new vehicles sold in the U.S. and Canada. U.S. regulations began according to a two year phase-in on May 1, 2016, and both the U.S. and Canada require that all such vehicles manufactured on or after May 1, 2018 have rear visibility systems.
A CAUTION screw for the ground wire loosens or falls out, it could result in fire generation of smoke or malfunction. Ground wire POWER AMP Other devices (Another electronic device in the car) Metal parts of car’s body *1 Not supplied for this unit • When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product. • When disconnecting a connector, pull the connector itself. Do not pull the lead, as you may pull it out of the connector.
Rear panel (main terminals) WARNING • To avoid the risk of accident and the potential violation of applicable laws, this product should never be used while the vehicle is being driven except for navigation purposes. And, also rear displays should not be in a location where it is a visible distraction to the driver. • In some countries, the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal.
Power amp (sold separately) - Important The speaker leads are not used when this connection is in use. English Violet/black Subwoofer (4 Ω) When using a subwoofer of 2 Ω, be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads. @ Not used. (@ Subwoofer (4 Ω) × 2 Speaker leads ® NOTES Perform these connections when using a subwoofer without the optional amplifier.
Middle range output (NW) ® Yellow/black (MUTE) If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. (J) This product ® System remote control Connect to Blue/white cable (max. 300 mA 12 V DC).
Camera External video component When you use the rear view camera, the rear view image is automatically switched from the video by moving the shift lever to REVERSE (R). Camera View mode also allows you to check what is behind you while driving. 1~ - - -1 Using anAUX input English ef'I A WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. t ~ A CAUTION • The screen image may appear reversed.
- @ External video component (sold separately) - separately) @) HDMI device (sold separately) NOTE The appropriate setting is required to use the external video component. For details, refer to the Operation Manual. A CAUTION Be sure to use a mini-jack AV cable (CDRM10) (sold separately) for wiring. If you use other cables, the wiring position might differ resulting in disturbed images and sounds.
IInstallation CAUTION • Never install this product in places where, or in a manner that: – Could injure the driver or passengers if the vehicle stops suddenly. – May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or shift lever. • Make sure there is nothing behind the dashboard or paneling when drilling holes in them.
~ ~ \ \ ' G) • (;) (;J~ ~ @@ CD Factory radio-mounting bracket ® If the pawl interferes with installation, you may bend it down out of the way. ® Dashboard or console © Truss head screw or flush surface screw Be sure to use the screws supplied with this product. Installing the GPS antenna A CAUTION Do not cut the GPS antenna lead to shorten it or use an extension to make it longer. Altering the antenna cable could result in a short circuit or malfunction and permanent damage to this product.
I When installing the antenna inside the vehicle (on the dashboard or rear shelf) I A Make sure the surface is free of moisture, dust, grime, oil, etc., before affixing the metal sheet. • Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver’s voice. • Be sure to turn off (ACC OFF) the product before connecting the microphone.
After installation 5 After installing this product Drive down an unobstructed road until the GPS starts receiving the signal normally. - NOTE 1 Double-sided tape Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle. - NOTE 2 3 Install the microphone on the steering column, keeping it away from the steering wheel. I Adjusting the microphone angle Reconnect the negative (-) terminal of the vehicle’s battery.
PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346 TEL: 65-6378-7888 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
Pioneer Quick Start Guide MULTIMEDIA NAVIGATION RECEIVER AVIC-W8400N EX/AVIC-W6400N EX This guide is intended to guide you through the basic functions of th is navigation system . For details, please refer to the Operation manual stored on the webs ite. ti [!] . . http://www.pioneerelectronics.com/PUSA/Car Basic hardware buttons AVIC-W8400N EX AVIC-W6400NEX G) VOL ( + /-) button ® ~ button Press to adjust the AV (Audio and Video) source volume. 0 C'j.
Switching screens using the touch panel keys Switching screens using the hardware buttons a iJ 1 21 f:, .. \. n ..,. .,.~ .. • .._ • . .-.. -"I , A·, \ .
How to use the navigation menu screens You can use various functions such as the route guidance and related settings. w @ ® @ ® ® @ @ @ I I (J) CD Returns to the Map screen. @ Searches for your destination by the address or coordinates, or searches for the selected place of interest, etc. ® Builds your route or edits the route currently set. © Displays the traffic information. ® Displays useful information to support your driving. ® Displays notifications that contain important information.
Searching for a location by address 1 Press Iii button. 6 The Map screen appears. 2 Touch El to display the navigation menu on the Map screen. 3 Touch [New Route] . 4 Touch [Address]. 5 Input the information for the location you want to set as the destination. Touch [Select as Destination]. After a short summary of the route parameters, a map appears showing the entire route . The route is automatical ly calculated. United States.
How to use the map Most of t he information provided by your navigat ion system can be seen on t he map. You need to become fam iliar wit h how the informat ion appears on the map. The following information marked w it h an asterisk (*) appears on ly when a route is set. AV information is displayed at the bottom of the Map screen . G) I ® @ ® ® ® (J) CD Shows the number and name of the street to be used (or next guidance point).* Cg) Shows the next guidance point (maneuver) .
Pairing your Bluetooth® devices You can use various functions (hands-free phoning and Bluetooth audio etc.) by connecting your Bluetooth devices to th is navigation system. To use the functions , pair the devices w ith the navigation system in advance. 1 Activate the Bluetooth wireless technology on your devices. 2 Press the :: button to display the Top menu screen. 3 Touch ~ and then @. The "Bluetooth " screen appears. 4 Touch [Connection]. 5 Touch i1.
Using hands-free phoning If your cellular phone features Bluetooth technology! this navigation system can be connected to your cellular phone wirelessly. Using th is hands-free function, you can operate the navigation system to make or receive phone calls. You can also transfer the phone book data stored in your cellular phone to the navigation system. ® G) Displays the preset dial screen. CV Switches to the phone book list. G) Switches to the missed received and dialed call lists.
Using the radio @) ® G) Displays the source list. Cg) Selects a band. G) Displays the Time and date setting screen. @ Displays the Setting menu screen. ® Recalls equalizer curves. ® Switches the text display between the main channel and sub channels. (j) Displays the Phone menu screen. ® Performs manual tuning or seek tuning, ® ® Displays the preset channels. @) Recal Is the preset channel stored to a key from memory with a single touch of the key.
Pioneer m ::::, ~ AVIC-W8400N EX AVIC-W6400NEX iii' :::r MULTIMEDIA NAVIGATION RECEIVER RECEPTEUR DE NAVIGATION MULTIMEDIA Be sure to read both this leaflet and Operation Manual stored on the website! Both documents include important information that you must understand before using this product. Assurez-vous de lire ce feuillet et le Mode d'emploi disponible sur le site Web! Les deux documents contiennent des informations importantes que vous devez comprendre avant d'utiliser ce produit.
IPrecaution IContents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. ■ Precaution .......................... 2 Information to user ..................................................... 2 Conventions used in this manual... ........................ 3 Terms used in this manual .......................................
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1 :2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. I CLASS 1 LASER PRODUCT I CAUTION-CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
& WARNING • Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards. • Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.
the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place. AwARNING • LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
Protecting the LCD panel and screen • Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures. • When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc. • To protect the LCD screen from damage, ,be sure to touch the touch panel keys only with your finger and do so gently.
IIntroduction License, Warranty Disclaimer & Limitation of Liability THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. ("PIONEER"). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States.
ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION, AND OTHER TORTS.
personal digital assistants or P0As. Warning: This Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic Data, any of which may lead to incorrect results. No Warranty: This Data is provided to you "as is': and you agree to use it at your own risk. HERE and its licensors (and their licen.
This product includes software developed by IVONA Software Sp. z o.o. Please comply with the terms and conditions of the End User License Agreement set forth by IVONA Software Sp. z o.o. ► End User License Agreement 1.0 PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE DOWNLOADING, INSTALLING OR USING IVONA'S SOFTWARE (AS DEFINED BELOW) OR THE PRODUCT.
you will not distribute Speech, in any manner, including, but not limited to, in the form of audio files, as a part of applications, materials or multimedia works created by or for you or otherwise transmit, rent, resell, lease or lend Speech to any third party. You will not market or distribute the Software with any software or other materials that are subject to licenses or restrictions (e.g.
information to others, but not in a form that personally identifies you. 13. No Warranty. Neither IVONA nor any of its Affiliates, designated agents, licensors or suppliers warrant that the Software will meet your requirements or that the operation of the Software will be uninterrupted or error free.
Notes before using the system Important (Serial Number:) The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card. Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information.
Register your product at Enregistrez votre produit sur http://www.pioneerelectronics.com in Canada au Canada http://www.pioneerelectronics.ca To keep up to date with the latest navigational data, you can periodically update your navigation system. For further detai Is, please visit: Vous pouvez mettre jour regulierement votre systeme de navigation pour rester jour avec les plus recentes donnees de navigation. Pour pl us de detai Is, visitez : a a http://pioneer.naviextras.
"" , ·~ I 1---~---~---~-..1~ \l Pioneer AVIC-W8400NEX Flagship In-Dash Navigation AV Receiver with 7” WVGA Capacitive Touchscreen Display Pion<- , » • Android Auto™ Wireless and Android Auto compatible using either wireless or wired connection • Apple CarPlay™ compatible using either wireless or wired connection • Wi-Fi Certified Miracast™ compatible (Wireless Mirroring) • AppRadio® Mode+ for Android smartphones and iPhone devices • Built-in, highly detailed turn-by-turn navigation with real-
' AVIC-W8400NEX android auto "a -- r+ :;:?t~~~MAJm~ I◄ l lkeMeBe11er _____ _ __ ~ • ' ,, 0 ►I .. - • • • • • "O 11n ,!, • • • • • • I Like Me Bette r - - - - -.-0 • • • • " 0 ,!, ►I • • 0 - - - - -.
Notes on Using a USB Type-C Phone Please purchase a USB-A to USB Type-C cable separately. Note sull'utilizzo di un telefono con USB tipo C Acquistare un cavo da USB-A a USB tipo C venduto separatamente. Opmerkingen over het gebruik van een telefoon met USB Type-C Koop een kabel van USB-A naar USB Type-C afzonderlijk. AATTENZIONE II telefono con USB tipo C potrebbe non funzionare con alcuni cavi. Utilizzare i cavi consigliati.
Pioneer Model: Type: I AVIC--W8400NEX/XNUC ------------ Serial Number: Numero de serie: http://www.pioneerelectronics.com a l"adresse suivante: http://www.pioneerelecronics.com in Canada Au Canada http://www.pioneerelectronics.ca http://www.pioneerelectlonics.
English Table/Tableau/Tabella/Tabelle/Tabla/Tabel/Tabela/Tabell/ Skema/Taulukko Notice to customers with Apple CarPlay-compatible devices If you connect an Apple CarPlay-compatible device to this product, you will be able to control compatible features directly from the product's screen. For details on using Apple CarPlay, please visit the website for your region (see table at right) to access the instruction manual for Apple CarPlay. Apple CarPlay may not be available in your country or region.
Pioneer PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITEE GARANTIE VALIDE UNIQUEMENT DANS LE PAYS D'ACHAT DU PRODUIT GARANTIE Pioneer Electronics (USA) Inc.
Pioneer PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (Pioneer) warrants that Pioneer® Car Electronics, Speaker, and Accessory Products distributed by Pioneer in the U.S.A.