Owner's Manual

Table Of Contents
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the contact surface facing to the
left and press the card until it clicks and com-
pletely locks.
4 Press the OPEN CLOSE button.
The LCD panel closes, and then the navigation
system restarts.
p If the SD memory card only contains music
files or video files, the navigation system
will not be restarted.
Ejecting an SD memory card
1 Press the OPEN CLOSE button.
The Monitor Setup screen appears.
2 Touch [Eject SD].
The following message appears.
3 Touch [Yes].
The navigation system restarts, and then the
LCD panel opens.
4 Press the SD memory card until it clicks.
5 Pull out the SD memory card.
6 Press the OPEN CLOSE button.
The LCD panel closes, and then the navigation
system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Basic operation
En
30
Chapter
02