User's Manual

ManualsBrandsPioneer ManualsCar Stereo SystemPioneer Car Stereo System DEH-X8500BT

Delete device (deleting a device from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a dev ice you want

to delete.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to display Delete YES.

4 Press M.C. to delete the device information from

the device list.

! While this function is in use, do not turn off the

engine.

Add device (connecting a new device)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, Not found is displayed.

2 Turn M.C. to select a device from the device list.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit). Enter the PIN code

on your device if necessary.

! PIN code is set to 0000 as the default. You

can change this code.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

Auto connect (connecting to a Bluetooth device

automatically)

1 Press M.C. to turn automatic connection on or

off.

Visibility (setting the visibility of this unit)

Bluetooth visibility can be turned on so that other de-

vices can discover the unit.

1 Press M.C. to turn the visibility of this unit on or

off.

Pin code input (PIN code input)

You must enter a PIN code on your device to confirm

the Bluetooth connection. The default code is 0000,

but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you to

the PIN code input display, and you can

change the PIN code.

Device INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the desired setting.

Device name—Bluetooth device address

Phone menu operation

Important

Be sure to park your vehicle in a safe place and

apply the parking brake when performing this op-

eration.

1 Press to display the phone menu.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

Missed calls (missed call history)

Dialed calls (dialed call history)

Received calls (received call history)

1 Press M.C. to display the phone number list.

2 Turn M.C. to select a name or phone number.

3 Press M.C. to make a call.

! To display details about the contact you selected,

press and hold M.C.

PhoneBook (phone book)

Section

Using this unit