User's Manual

ManualsBrandsPioneer ManualsCar Video SystemPioneer Car Video System DVH-P4390UB

% Press to switch the information dis-

play.

Information display—Title display

# If an album art data is not included in a song,

PHOTO is displayed.

Audio Adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

FAD/BAL (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader (front/rear) and

balance (left/right).

3 Turn M.C. to adjust speaker balance.

EQUALIZER (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM—

FLAT—POWERFUL

3 Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustment)

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press M.C. to display the setting mode.

2 Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

3 Turn M.C. to adjust the level.

Adjustment range: +6 to –6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—LOW(low)—HIGH (high)

3 Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

When selecting FM as the source, you cannot switch

to SLA.

! Settings are based on the FM volume level, which

remains unchanged.

! The AM volume level can also be adjusted with

this function.

! Video CD, CD, compressed audio and DivX are

automatically set to the same source level adjust-

ment volume .

! Bluetooth, external unit 1 and external unit 2 are

automatically set to the same source level adjust-

ment volume .

! iPod and USB storage device are automatically

set to the same source level adjustment volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Section

Operating this unit

Setting up the DVD player

Introduction of DVD setup

adjustments

You can use this menu to change audio, subtitle, par-

ental lock and other DVD settings.

! To perform this function, set the remote control to

DVD mode.

1 Select DVD as the source and then press g.

2 Press MENU when the disc is stopped.

The DVD setup menu is displayed.

3 Move the thumb pad left or right to switch the

DVD setup menu categories.

LANG. (language)—PICT. (picture)—GEN. (gener-

al)

4 Move the thumb pad up or down to select the

DVD setup function names.

For LANG.: SUBTITLE LANG. (subtitle language

settings)—AUDIO LANG. (audio language set-

tings)—MENU LANG. (menu language settings)

—OSD LANGUAGE (on screen display language

setting)—CHARACTER SET (character set set-

ting)

For PICT.: ANGLE ICON DISPLAY (angle icon)—

TV ASPECT (TV aspect)—SLIDESHOW TIME (sli-

deshow interval time setting)

For GEN.: PARENTAL (parental lock)—DivX SUB-

TITLE (DivX subtitle)—IEC DIGITAL OUTPUT (di-

gital output setting)—DivX VOD (DivX VOD)—

SAMPLING OUTPUT (down sampling output set-

ting)

If you press MENU during display of a DVD setup

menu, the DVD setup menu is canceled and the

unit returns to the previous display.

Menu operations identical for

DVD setup adjustments

Returning to the previous display

1 Press RETURN.

Setting the subtitle language

You can set a desired subtitle language. When avail-

able, the subtitles will be displayed in the sel ected

language.

1 Move the thumb pad up or down to select SUBTI-

TLE LANG. in LANG.

2 Click the thumb pad.

A subtitle language menu is displayed.

3 Move the thumb pad up, down, left or right to se-

lect the desired language.

4 Click the thumb pad.

The subtitle language is set.

Notes

! If the selected language is not available, the

language specified on the disc is displayed.

! You can also switch the subtitle language by

pressing SUBTITLE during playback. (Refer to

Changing the subtitle language during play-

back (Multi-subtitle) on page 16.)

! The setting made here will not be affected

even if the subtitle language is switched dur-

ing playback using SUBTITLE.

When you select OTHERS

A language code input display is shown when

OTHERS is selected. Refer to Language code chart for

DVD on page 66.

1 Pressing CLEAR cancels the input numbers.

Setting the audio language

1 Move the thumb pad up or down to select AUDIO

LANG. in LANG.

2 Click the thumb pad.

An audio language menu is displayed.

3 Move the thumb pad up, down, left or right to se-

lect the desired audio language.

4 Click the thumb pad.

The audio language is set.

Notes

! If the selected language is not available, the

language specified on the disc is used.

Section

Operating this unit

<QRB3172-A/N>13