User's Manual

ManualsBrandsPioneer ManualsCar Video SystemPioneer Car Video System DVH-P4390UB

Changing the level

You can change the set parental lock level.

1 Move the thumb pad up or down to select PAR-

ENTAL in GEN.

2 Click the thumb pad.

Parental lock setting menu is displayed.

3 Press 0 to 9 to input the registered code number.

4 Move the thumb pad left or right to move the cur-

sor to the previous or next position.

5 Click the thumb pad after entering the four digit

code number.

This sets the code number, and the level can now

be changed.

! If you input an incorrect code number, the

icon

is displayed. Input the correct code

number.

! If you forget your code number, refer to If you

forget your code number on this page.

6 Move the thumb pad left or right to select the de-

sired level.

7 Click the thumb pad.

The parental lock level is set.

If you forget your code number

Please see the following section, and press CLEAR 10

times in the parental lock setting menu. Refer to

Changing the level on this page. The registered code

number is canceled, letting you register a new one.

Setting the DivX subtitle file

You can select whether or not to display DivX external

subtitles.

! The DivX subtitles will be displayed even when

CUSTOM is selected if no DivX externa l subtitle

files exist.

1 Move the thumb pad up or down to select DivX

SUBTITLE in GEN.

2 Click the thumb pad to select whether to display

DivX external subtitles or not.

! ORIGINAL – Display the DivX subtitles

! CUSTOM – Display the DivX external subtitles

Notes

! Up to 42 characters can be displayed on one

line. If more than 42 characters are set, the

line breaks and the characters are displayed

on the next line.

! Up to 126 characters can be displayed on one

screen. If more than 126 characters are set,

the excess characters will not be displayed.

Setting for digital output

Audio which is outputted from digital output of this

unit can be selected. Normally, set to STREAM. If this

unit’s digital output is not used, there is no need to

change settings.

! Selecting Linear PCM enables you to switch the

output channel if playing dual mono mode DVD

video discs.

1 Move the thumb pad up or down to select IEC DI-

GITAL OUTPUT in GEN.

2 Click the thumb pad to select the desired digital

output setting.

! STREAM – The Dolby Digital/DTS signal is

output as it is (initial setting)

! Linear PCM – The Dolby Digital/DTS signal is

converted to and output as a linear PCM sig-

nal

Displaying the DivX

VOD

registration code

In order to play DivX VOD (video on demand) con-

tents on this unit, the unit must first be registered

with a DivX VOD contents provider. For registration,

generate a DivX VOD registration code and submit it

to your provider.

! Keep a record of the code as you will need it

when you register your unit to the DivX VOD provi-

der.

1 Move the thumb pad up or down to select DivX

VOD in GEN.

2 Click the thumb pad.

3 Move the thumb pad up or down to select REGIS-

TRATION CODE.

4 Click the thumb pad.

Your registration code is displayed.

Section

Operating this unit

Displaying the deregistration code

If your device is already activated, deregister it by en -

tering the deregistration code.

1 Move the thumb pad up or down to select DivX

VOD in GEN.

2 Click the thumb pad.

3 Move the thumb pad up or down to select DE-

REGISTRATION CODE.

4 Click the thumb pad.

5 Move the thumb pad up or down to select OK.

! To cancel deregistration, select CANCEL.

6 Click the thumb pad.

The deregistration is complete.

Setting the down sampling output

If the sampling frequency of the audio is more than

96 kHz, the audio outputted from the digital output of

this unit can be reduced to 48 kHz. Normally, set the

down sampling output to on. If this unit’s digital out-

put is not used, there is no need to change settings.

1 Move the thumb pad up or down to select SAM-

PLING OUTPUT in GEN.

2 Click the thumb pad.

Each time you click the thumb pad the selected

setting switch es on or off.

Initial Settings

1 Press and hold S (SRC/OFF) until the

unit turns off.

2 Press M.C. and hold until the initial set-

ting menu appears in the display.

3 Turn M.C. to select one of the initial set-

tings.

After selecting, perform the following proce-

dures to set the initial setting.

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock dis-

play you wish to set.

Each time you press M.C., one segment of the

clock display is selected.

Hour—Minute

3 Turn M.C. to adjust the clock.

FM STEP (FM tuning step)

The FM tuning step employed by seek tuning can be

switched between 100 kHz, the preset step,

and 50 kHz.

! If seek tuning is performed in 50 kHz steps, sta-

tions may be tuned in imprecisely. Tune in the sta-

tions with manual tuning or use seek tuning

again.

! The tuning step remains at 50 kHz during manual

tuning.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the FM tuning step.

50KHZ (50 kHz)—100KHZ (100 kHz)

3 Press M.C. to confirm the selection.

AM STEP (AM tuning step)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the AM tuning step.

10KHZ (10 kHz)—9KHZ (9 kHz)

3 Press M.C. to confirm the selection.

AUX1 (front AUX input setting)

Activate this setting when using an auxiliary device

connected to this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

AUDIO (auxiliary device connected with stereo

mini plug cable) – VIDEO (auxiliary video device

connected with a 4-pole mini plug cable) – OFF

(No auxiliary device)

3 Press M.C. to confirm the selection.

AUX2 (rear RCA input setting)

1 Press M.C. to turn AUX2 on or off.

VIDEO IN (Setting AV input)

Section

Operating this unit

<QRB3172-A/N>15